Electronics Forum | Mon Mar 15 03:43:54 EDT 2021 | rubyqi1027
Mirant was founded in 2004. With almost 17 years of experience in the industry we designs, develops, manufactures, markets and sells material handling equipment including sieving, mixing, crushing and transporting for a variety of industries around t
Electronics Forum | Tue Oct 14 07:22:05 EDT 2008 | ccouture
I use this directly in the solder pot inside the wave machine. It is small enough to float at the surface of the solder, yet by loading it it act as a sieve and retains the dross while most of the solder pass trough, allowing me to clean the whole po
Electronics Forum | Mon May 29 07:46:30 EDT 2006 | bwet
In reviewing the JEDEC 95 guidelines (2002) there is not a mention of tolerances that have been agreed upon for today's finer pitch devices. There was no mention of the solder diameter tolerances (low melt temp) allowed for 0.8mm, 0.6mm and 0.5mm pit
Electronics Forum | Fri Oct 10 13:53:27 EDT 2008 | ccouture
Has anybody ever use this method to reclaim the solder from dross. I tested this $10 gadget, it's used to press potato to make mash potato. The result is comparable to a $20k machine that basically does the same thing, i.e.: compress dross to squeeze
Electronics Forum | Tue Jul 30 08:38:55 EDT 2002 | dasal
Truthfully, there are pro's and con's for both technologies. (put cost of ownership aside for one moment) Nitrogen won't dry humidified components as rapidly as a desiccant dry box. I'm talking about a self regenerating dry box that uses molecular s
Electronics Forum | Sat Jul 02 10:27:19 EDT 2022 | madisreivik
Hello ! I got exp only with leadfree HASL, but maybe the same problems apply. Also, the leaded HASL has probably lower process temperature. This could be copper, which has settled to the tank bottom. With leadfree, the copper is removed from molten
| 1 |
