Electronics Forum | Fri Feb 26 10:34:03 EST 2010 | kpm135
If I had to guess I'd say they're using a silicone based adhesive.
Electronics Forum | Fri Feb 11 16:34:01 EST 2000 | Chris McDonald
Does anybody have a source for jigs/tanks for a manual dip operation? We are stuck conformally coating PCBs manualy and the volumes do not justify us buying a 100k automated machine. there for we have to manually dip the pcb in a silicon based coatin
Electronics Forum | Tue Jan 31 13:41:41 EST 2017 | tombstonesmt
Dow Corning 3-1953 is widely used when it comes to silicone based conformal coatings. Low odor, medium viscosity, can be atomized or needle dispensed. We have our operators fill syringe cartridges for any minor touch up.
Electronics Forum | Thu Apr 20 09:26:10 EDT 2006 | amol_kane
I am using Silicone based boots with SR coating with good results. I Use Vinyl and Rubber boots with AR and UR coatings.
Electronics Forum | Thu Jun 07 16:12:36 EDT 2001 | csullivan
Does anyone know of a good masking material for conformal coating? The coating is silicon based. Any help would be greatly appreciated. Thanks
Electronics Forum | Mon Aug 25 14:55:51 EDT 2008 | grics
I have a question for the manufacturing masters... We are going to start running test trials/DOE of a Urethane Coating (Humiseal 1A33) and I am not sure what to expect. From what I understand, urethane coating is pretty difficult to work. It is supp
Electronics Forum | Fri Jan 26 13:26:30 EST 2007 | rw
We are developing a new product that requires conformal coating on the motor controller. We selected a silicone based conformal coat due to its ease of use. There has been disagreement among engineers as to its impact on the motor. We have contact
Electronics Forum | Mon Jun 18 11:17:40 EDT 2001 | Howie
The adhesive type is the problem generally - latex adhesives used are not compatible with the silicone. Humiseal offer silicone compatible tapes & dots although they are quite expensive. I found a 3M product which is compatible with silicone based co
Electronics Forum | Wed Apr 19 16:43:05 EDT 2006 | samir
Silicone-based coatings "repel" most foreign,non-compatible materials like peelable solder mask, and rubber or vinyl boots. The result is, uncured material around the vicinity of where the boot was. Trust me. Been there and done that. As a rookie
Electronics Forum | Mon Dec 08 16:47:50 EST 2008 | pwilson1
Hi All, Does anyone know of a method (automated if possible) for removing cured Conformal Coating, silicone based, from plastic?? I m looking into a method of cleaning our internal packaging (mainly plastic boxes etc), which have cured sil
