Electronics Forum | Tue Nov 15 14:31:59 EST 2005 | Samir Nagheenanajar
Back in the days when I was in charge of a Paintline Dip conformal coater, I had the same issue with a non-hermetically sealed Potentiometer. We tried to use rubber boots, but the capillary/wicking action of our silicone-based heat cured coating was
Electronics Forum | Mon Oct 06 18:41:47 EDT 2003 | davef
In addition to our earlier comments, do not be misled into thinking that silicone materials, being rubbery, will transmit shock less. Nothing is farther from the truth. Many silicone rubbers are almost totally incompressible in the short time scale.
Electronics Forum | Thu Jan 12 15:36:59 EST 2012 | swag
I've got specialized tooling I'm building for SMT processing. It requires a 0.125" thick sheet of high temp. silicon rubber cut to shape. Does anyone know of someone who can cut silicon sheets to a specific pattern/design?
Electronics Forum | Fri Feb 17 07:23:29 EST 2017 | sevenfortyone
I'm a PCB designer working on a board that has a rubber keypad with control buttons mounted to it. The PCB contains the corresponding contact patterns for the buttons - a typical interlocking finger pattern. In the past when I've encountered this
Electronics Forum | Tue Jul 27 10:11:26 EDT 1999 | John Thorup
| Does anyone know where I can find the supplier of an adhesive RTV5204. | Don't know for sure but General Electric silicone rubber adhesives are prefixed with "RTV" Try GE silicones at 518/233-3330 (might be an old area code) or distributor R.S. H
Electronics Forum | Thu Apr 20 09:26:10 EDT 2006 | amol_kane
I am using Silicone based boots with SR coating with good results. I Use Vinyl and Rubber boots with AR and UR coatings.
Electronics Forum | Thu May 27 15:59:30 EDT 2010 | mikesewell
ATS-667 tape. You can buy direct http://www.ats24.com/index.cfm?fuseaction=content.display&contentid=50 or through distribution such as All-Spec. Polyester film with rubber resin adhesive (no silicone) = clean mask lines. Call for a sample.
Electronics Forum | Mon Feb 26 09:36:08 EST 2001 | blnorman
ASTM E 443 is a test for sulfur by Oxygen Flask Combustion. Other instruments will detect sulfur (I assume a SEM with EDS capability will pick up the sulfur). We had an addition cure silicone potting compound inhibition problem last year that was t
Electronics Forum | Sun Feb 06 15:26:32 EST 2000 | Carol Zhang
I have a board which contains brass spacers. The spacers will pass through the wave during soldering. I found a silicon-rubber cap that can prevent solder climbing up into the spacer. However, the cap influence the wave flow and reduce the solderabil
Electronics Forum | Mon Aug 04 10:28:55 EDT 2003 | jseagle
Dave, Where can I get the rubber boots you are talking about? We are going to have to start doing 100% conformal coating of boards for some of our customers in high volume, we currently only do a selective coat. We currently use a silicon coating,
.gif)
