Electronics Forum | Tue Dec 19 08:32:44 EST 2006 | davef
Take your choice: * Can't image this is a good thing. The board under the die will 'dry-out' and turn brittle over-time. It's possible the way attachment glue bonds to the board will change as the board dries-out. * Epoxy suppliers pad their number
Electronics Forum | Tue Aug 27 03:45:36 EDT 2002 | seje
Hi there. We are considering to attach die chip with solder paste to the pcb at the SMD line (we are used to attach it with silver epoxy at the die bonding line before). This is a whole new method to me, so I'd like to have some opinions here. Where
Electronics Forum | Tue Jan 09 22:04:48 EST 2007 | Guest
Set Up Guy, I am not sure if the COB you are refering to means Circuit on Board . If yes, this process also include SMT . Package is a combination of some passive components and bare die. Passives are normally attached thru SMT using solder te
Electronics Forum | Tue Nov 05 06:51:59 EST 2002 | V.RAMANAND KINI
Hi, This is a widely discussed subject and since you have asked a brief explanation, I assume, you are a business man or a top executive in the company venturing in to COB. I waited to see if someone replies to you. May be it is a very old subject
Electronics Forum | Thu Dec 18 13:07:50 EST 2014 | kevinb
I have worked with Epoxy Technology in the past with silver epoxy. Just to fill you in on what I have been doing with this project in the past. I was using a silver epoxy for my 0201s. I then over molded with an epoxy with a dam and fill. Then th
Electronics Forum | Mon Mar 21 02:51:23 EST 2005 | amstech
I have done few thermocouples using high lead solder, silver epoxy that is used for die attach purposes and some X - non conductive material. Though all materials show a slight variation in temperatures (3 to 5 degree C), the dwell time at peak is qu
Electronics Forum | Fri Sep 18 08:49:12 EDT 1998 | Earl Moon
| | We have problems with voids when we solder lids to | | ceramic flatpackages. | | The sealring of the package is gold(100 micro inches or 2.5 micro meters)with a underlayer of Nickel | | The solder is attached to the lid (preform) and the solder
| 1 |
