Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Thu Mar 14 19:08:56 EST 2002 | stevezeva
Hi ya'll! I know this is going to be an extreme longshot, but I'm in desperate need of a Assemblion Emerald 54mm front light camera mirror (part number 5322-380-10285). Ours got cracked somehow (still haven't found out how, probably never will...
Electronics Forum | Tue Dec 12 17:34:39 EST 2017 | spoiltforchoice
A pattern emerges, but really I think it means plan/optimise for your day/week not a single job. Our machine uses 10's, this means there's a significant chunk of the feeder that is not easily accessible if something like a brass shim gets stuck or f
Electronics Forum | Wed Oct 23 13:01:11 EDT 2019 | compit
I have a single-view camera on a Topaz-X machine. When I define a connector type element - it displays messages like in attached files. If I change the type to IC - no problem. There is also no problem when "learning&quot
Electronics Forum | Sat Nov 09 20:11:43 EST 2019 | richardcargill
I suspect configuration too. From memory, only certain heads are assignable as 'Fine'. Changing this parameter in the component data to Standard or QFP will most likely cure this as any head will accept those two options
Electronics Forum | Sun Nov 10 05:40:27 EST 2019 | compit
It turned out that only SF heads support "fine" mode, while FNC does not. Probably because above the FNC nozzle there is a "circle" rotating the nozzles, and in fine mode it can interfere with the reflection of the camera light - the element is lower
Electronics Forum | Tue Sep 20 12:38:05 EDT 2005 | Mark
Hallo, I have a problem with Topaz Xi with FNC nozzles. We have front, back and single camera in Topaz Xi. When i am using front camera and placing SO8, TSSOP14, TSSOP16 etc, using nozzles 73F the accurancy is ok. But when i switch to the back cam
Electronics Forum | Fri Oct 17 14:55:50 EDT 2008 | rway
We use a YesTech M1 system. I have been pleased with it's performance and feel it has done fairly well being that it only has one vertical camera. There are different algorithms you can use to compensate for the lack of angled cameras to catch some
Electronics Forum | Mon Jul 20 12:39:11 EDT 2009 | bigdaddysoy9
Hello Reese, Lifted leads are and have always been a big concern for us. We were using a system that had 12 cameras total. 8 angled and 4 top-down. I could not get that to catch lifted leads without having a ton of false calls. I thought that may
Electronics Forum | Sat Aug 07 01:04:40 EDT 2004 | rsgupta
Why not.. You are always welcome. Firstly what I feel multicamera system (Top and Angled) AOI is always better than single Top camera system in terms of defect coverage. Secondly read On the fly inspection is much better than STOP and Go techniques.
