Electronics Forum | Mon Nov 18 19:54:52 EST 2024 | tey422
Can you repackage them using tape & reel? Add the masking dots on top of the LED would do the trick.
Electronics Forum | Tue Nov 19 10:24:12 EST 2024 | suum
One option is to put the coil in the refrigerator (tried it works), but everything is at your own peril and risk.
Electronics Forum | Tue Nov 19 02:15:35 EST 2024 | auriga2001
Since you are using Siplace X series equipment, have you checked the Siplace ProDesk software for the component shape settings for that part? There is a section in 'handling' that has 'placement air kiss' settings. That gives a little burst of air to
Electronics Forum | Mon Nov 18 09:38:58 EST 2024 | dimamalin
Hello everyone, We're currently experiencing an issue with placing Kingbright ATS2013UV385 type LEDs on our PCBs using Siplace X equipment. The component has a sticky silicone coating on its surface, which causes it to adhere to the nozzle, preventi
Electronics Forum | Thu Mar 21 14:27:56 EDT 2013 | markhoch
Does any of you fine, upstanding, young, persons have any experience with SiPlace's Line Monitor? It looks to be very informative... Just wondering if it's all that it's cracked up to be. Thanks in advance!
Electronics Forum | Tue Aug 06 05:43:41 EDT 2013 | chris_flex
You can goto: http://www.siplace.com/11092/Downloads-Support/Download-Area/aud_index.aspx?newsid= Then you have to register yourself to get access to all Manuals. There are usermanuals for S15/F3 available. /Chris
Electronics Forum | Tue Nov 19 10:31:39 EST 2024 | carl_p
I have the pleasure of dealing with LED placements daily with many LED suppliers. What is the temp & humidity of your facility, i have found this to be the biggest impact when placing "tacky" LED's cree are wonderful as the temps increase. to the po
Electronics Forum | Wed Nov 20 11:34:53 EST 2024 | oxygensmd
There are one more try on silicone surface LEDs. Use rotated nozzle on LED. Catch them on shorter side and not on longer side. Turn off pick-up vaccum if the nozzle have bigger surface as LEDs have - false vaccuum response. Keep turn on placement vac
Electronics Forum | Wed Jan 02 09:16:05 EST 2013 | dan_ems
Thank you, I already ask for the software, but maybe because of the holidays I don't have an answer until now. Sarason, I still waiting for the original software but is good to know that there are alternatives.
Electronics Forum | Mon Aug 05 17:24:16 EDT 2013 | jorge_quijano
Hola Valeriy Not sure how the S15 works, but on the S20s & F4s there is a file on the C:WindowsSystem32driversetchosts that contains the Machine controller IP address & the Line Controller IP address, hope it helps. Saludos
