Electronics Forum | Fri Jul 05 01:08:41 EDT 2019 | kasun_elk
It's difficult to allocate one operator to splice empty tape because we are always try to minimize # operators. Most of the time original reel are received to production and after completed assembling small strips are inside the feeder then there is
Electronics Forum | Tue May 31 11:50:22 EDT 2005 | Stefan
There is quite some difference with a fixed head versus a head mounted to a X/Y gantry. If the head can move, feeder tables and board are fixed. If the head is fixed, feeder tables and board have to move. Spinning a component around on a vacuum nozz
Electronics Forum | Fri Apr 07 16:12:37 EDT 2006 | craig_83
I would like to freeze feeders on a global basis. I am tired of table changeovers everytime I run a different board. A good example is today I ran 1 board which went well. I wanted to run a board behind it that had 99% the same parts. I am not necess
Electronics Forum | Sun Apr 28 16:35:31 EDT 2002 | JoeS
If the reason you are looking into Mydata is for low quantities and higher changeover. I would look into their main competitor(s) also. I am a Quad (tyco) user and of course, I would suggest for you to look into the "Tyco" Q-series. There are none
Electronics Forum | Mon May 07 22:25:21 EDT 2001 | Doug Kester
Has anyone heard of a single or double tray holder plate for Siemens Siplace equipment (either OEM or aftermarket). This would be similar to the Universal, Quad, and Zevatech platens for trays that just clip on to the feeder holders. Have only a co
Electronics Forum | Wed May 09 10:39:03 EDT 2001 | davef
The two first level cuts at comparing placement machines are: * Placement rate * Range of component capabilities This boils-down approximately to machine price. Virtually, everyone's feeders are priced similarly. Go to "Circuits Assembly" magazine
Electronics Forum | Wed May 22 09:59:52 EDT 2002 | stefwitt
I don't know how much Siemens charges for this option, but I guess we both know what a new head costs. Siemens did let go on more service techs. last weekend. They all can install this option for less than Siemens quoted. If you can't find a tech. in
Electronics Forum | Tue Jun 04 14:25:57 EDT 2002 | swagner
We have had the crash protection installed on all of our machines and they are worth their weight in gold! Siemens installed some of ours on a special they were running last year, I believe it ran about $1,700.00 per machine, remember its a buyers m
Electronics Forum | Wed Jun 05 01:28:27 EDT 2002 | mantis
we had the fedder protection plates installed for about 6 months but ended up removing them as the plates were more hassel than there worth.The bolt on the estop swith kept slipping off and stopping the machine during produstion.It was very frustrat
Electronics Forum | Tue Dec 27 16:23:03 EST 2016 | sportsradar
Hello Murray, I lost track of your emails. We have emailed a couple of times over the last few months. Do you still have the 80S15 and F3 machines? With the PC and feeders? Please contact me. Thank you. Katrina Sports Radar Ltd Email: trina@sportsrad