Electronics Forum | Mon Dec 06 17:03:10 EST 2021 | victorzubashev
Hi, Did you check if you can ping between MC and SR?
Electronics Forum | Mon Nov 29 02:58:35 EST 2021 | erici
Our S25 is not booting up correctly. It is showing the 'software booting' status and will be stuck in that state. I checked the M/C pc and it is showing an SRBS SYSTEM HALTED error. Any ideas/help on this issue? Thanks
Electronics Forum | Mon Dec 06 21:38:22 EST 2021 | erici
Thanks victor, will go with your suggestions. By the way, would you happen to have some info on how to work the MC distributor? When i was working on the hard drive of the machine i was able to re install the MC software on a fresh harddrive, as i u
Electronics Forum | Mon Nov 29 13:39:48 EST 2021 | oxygensmd
Is it a running machine or a first startup? For me, it seems to be some configuration error. For example problem with some card (iCos, MC, servo controller). At first check table and WPC connectors are fitted properly than check the status LEDs on y
Electronics Forum | Mon Dec 06 21:07:36 EST 2021 | victorzubashev
Hi, you have flickering that affects all AC power in the machine (PC is also connected to the AC line (after step down transformer)), correct? Do you intermittently/randomly lose power in all machines units(MC/PS/Servo)? If I understood you correctly
Electronics Forum | Fri Jan 06 09:34:47 EST 2023 | micropak
Were you able to solve the issue ? I mean proper installation of MC hard drive rather than cloning ?
Electronics Forum | Wed Feb 23 13:22:31 EST 2022 | micropak
Congratulations on being operational again... Few years ago, I acquired a Siplace line (S20 + F3 + S15 + G2) and I rebuild it completely because the line was lying idle for more than 10 years. All belts, pneumatic cylinders, pneumatic pipes were cha
Electronics Forum | Sun Feb 06 03:48:39 EST 2022 | micropak
Though I am too late to see this thread, but just curious to know if your problem has been solved ? I have S20 whose MC HDD was built be me a few years ago, and probably it needs to reduild again as I am getting too much "Software Booting" on the st
Electronics Forum | Tue Feb 22 22:39:22 EST 2022 | cirsol
Hi, Sorry I didn't see your previous post. I do have an update but will answer your questions first. {So you only rebuilt the MC HDD and didn't rebuild the Station PC? Am I right ?} Yes that's correct, we only rebuilt the MC HDD but were not able t
Electronics Forum | Thu Dec 09 04:11:54 EST 2021 | cirsol
Hello Forumers, I'm hoping there might be a SiPlace expert or two trawling the forum. We have an S25 machine that essentially has a failed MC harddrive and we're trying to rebuild a new one. Attached are a few images and perhaps something shown her
