Electronics Forum | Mon Feb 22 05:39:58 EST 1999 | Scott Davies
We are currently using circle, cross and double-cross(#) fiducial patterns with SiPlace equipment. Most of the problems seem to occur when, in the case of a HASL fiducial mark, a PCB is topside reflowed, goes away for thru-hole and comes back for bot
Electronics Forum | Wed Sep 09 12:39:22 EDT 1998 | Chrys
| I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have information on where to purchase such a kit? Ideally this kit should be usable on placement equipment from various
Electronics Forum | Thu Oct 01 16:43:24 EDT 1998 | Mike Demos
Thanks for your reply! I do appreciate your response. I received some information from the company that sells Accuspec, but I hadn't heard from any users yet. Your sales pitch sounds on your unit sounds tempting, but I'll have to pass on your Ac
Electronics Forum | Tue Nov 13 04:47:19 EST 2018 | dhammika
hi Siplace Hs-60 defected due to below error Error- • Machine error:2271 Can bus: reception call aborted with time out seg:0 DEV: head 2 #:1 (this is not only head 2 ,error raise with all head interm
Electronics Forum | Thu Mar 03 03:54:38 EST 2022 | gary_sastrillas
The only way can detect, play around with your vision teaching with the component. and adjust the pin tolerance.
Electronics Forum | Wed Apr 22 15:18:47 EDT 1998 | RNLM
| I would like to know something about Siemens machines from users of Siplace or old machines. | Thanks ! I have found that the SIPLACE equipment is and will be supported more effectively as additional tools are made available for customer use.
Electronics Forum | Sun Oct 04 08:07:53 EDT 1998 | jvo
| I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution? | Check if you
Electronics Forum | Fri May 03 00:36:36 EDT 2002 | caldon
Not many tech stocks not plunging. Pete is correct.......You application should determine the machine not the machine determine the application. That is why there are machines from $15K(US) to +$400K. Mechanical, Laser, vision.......servo, linear...
Electronics Forum | Fri Dec 13 11:21:19 EST 2002 | dphilbrick
Since you asked for more here is my $ .02. There are many different vision systems, camera and software combinations that will make each make and model machine work differently. For instance a 1999 Siplace machine might work best with a 1.5mm round F
Electronics Forum | Fri Nov 19 14:50:46 EST 1999 | nick mata
If you are seeing reflection on the underside of the part, I would first begin with the recommended light levels for the BGA. You should be able to obtain the levels from the Siemens help desk. There is a 2 to 3 page document with levels for a variet
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.png)
.gif)
