Electronics Forum | Wed Sep 30 15:27:34 EDT 1998 | jvo
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is software.
Electronics Forum | Wed Sep 30 16:36:59 EDT 1998 | Dana R Simon
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. | | The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is soft
Electronics Forum | Sun Oct 04 08:07:53 EDT 1998 | jvo
| I am experiencing solder paste comtaminatin of nozzels on 0603 size components resulting in missing components. The machine is failing to alarm under these circumstances. Has anybody else experienced this problem & found a solution? | Check if you
Electronics Forum | Thu Mar 29 08:23:02 EST 2001 | CAL
Some AOI manufacturers require you to put in a GOLD PCB. Gold PCB is a perfectly manufactured board - Correct placements, correct polarity, no solder short, a "GOOD" PCB. With the vision limitations of some AOI equipment components that have variatio
Electronics Forum | Tue Aug 25 16:46:48 EDT 1998 | Bill West
| | | I am considering of Philips FCM for the next production. Jim, I think I would take the Phillips machine over the Fuji also, but have you looked at the Siemens F4 or F4/6. We are a Siplace house here, and we have been very happy with the equip
Electronics Forum | Wed Apr 22 15:18:47 EDT 1998 | RNLM
| I would like to know something about Siemens machines from users of Siplace or old machines. | Thanks ! I have found that the SIPLACE equipment is and will be supported more effectively as additional tools are made available for customer use.
Electronics Forum | Mon Feb 22 05:39:58 EST 1999 | Scott Davies
We are currently using circle, cross and double-cross(#) fiducial patterns with SiPlace equipment. Most of the problems seem to occur when, in the case of a HASL fiducial mark, a PCB is topside reflowed, goes away for thru-hole and comes back for bot
Electronics Forum | Thu Jul 23 15:19:52 EDT 1998 | Timm
| | I am considering of Philips FCM for the next production. | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | i.e. SOT might be populated in wrong direction. | | Can som
Electronics Forum | Mon Feb 04 19:24:37 EST 2008 | swag
We have an Advantis and it's great for low volume, high mix (flexjet head). If you have good CAD data to upload, it takes little time to program as you can update vision on parts and placements while you are actually building boards ("NPI mode"). I
Electronics Forum | Fri Dec 13 11:21:19 EST 2002 | dphilbrick
Since you asked for more here is my $ .02. There are many different vision systems, camera and software combinations that will make each make and model machine work differently. For instance a 1999 Siplace machine might work best with a 1.5mm round F
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723