Electronics Forum | Tue Aug 10 06:58:48 EDT 2004 | dka123
dear all, kindly guide me for the use of space electronics hardware assembky of PQFPs and Cqfps, how to form the flat pack leads, bend for 240 pins of 20 mil pitch and what are the Mil standards for them.how to cut the lead guards.can we use FP5 elit
Electronics Forum | Wed May 20 07:13:15 EDT 1998 | smd
Does anyone use the "Quick Frame" with their Dek printer? The threads on the screws keep stripping, so we thought maybe we'd send our frames to a machine shop for heftier screws. Has anyone done this? Is there a better way? Isn't it weird how Alpha k
Electronics Forum | Thu Jun 11 07:28:12 EDT 1998 | smd
Before risking screwing up the alignment of the frame, and upon the advice of several SMTNET users, I decided to see if I could get away W. just changing the screws. I found screws with 2x the pull strength as Alpha's. But they didn't fit!! The Alph
Electronics Forum | Tue Jul 28 07:02:59 EDT 1998 | smd
Right now we are taping the goldfingers which is effective but also expensive. Also, some tape was leaving yellow marks on the goldfingers. We're trying the so-called goldfinger glove from Steven's Products. It's a very small company (probably one gu
Electronics Forum | Thu Oct 14 12:02:44 EDT 1999 | Larry Johnson
I was wanting to know if there was any type of formula that I could use to determine the correct packaging for a SMD For example, if I have the component measurements, can I find out what the correct width and pitch of the tape it comes in should be
Electronics Forum | Sat Jul 30 01:36:04 EDT 2005 | Christofer Lapinskas
We are looking to have SMD components taped and reeled in Brazil. Are their any suppliers in Brazil? cl@latrex.com.br
Electronics Forum | Sat Jul 30 01:36:47 EDT 2005 | Christofer Lapinskas Latrex
We are looking to have SMD components taped and reeled in Brazil. Are their any suppliers in Brazil? cl@latrex.com.br
Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert
I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas
Electronics Forum | Mon May 26 08:23:49 EDT 2014 | mun4o
hi all, we have smd line with 2 Assembleon topaz X.The real speed of the line is about 12- 13k cph.I want to increase this speed.I intend to buy a Assembleon sapphire and change one of topaz with sapphire ( chip shooter).Has anyone of you similar c
Electronics Forum | Fri Jul 23 10:47:31 EDT 1999 | Mark D. Milward
There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing th
