Electronics Forum | Wed Aug 22 08:46:33 EDT 2007 | marcelll
Happen to me on a conveyor after a GSM but not a PCT. Had to install small caps to kill the noise on the conveyor PLC input from the GSM. Also, might be a question of timing betweem th GSM and the conveyor.
Electronics Forum | Wed Aug 22 04:29:48 EDT 2007 | raf_jabil
Has anyone experienced intermittent communication issues with GSM/GDM and PCT conveyors? I have an intermittent issue where sometimes I would hit the ESTOP on the PCT conveyor(downstream) in order to get the board to eject out of the GSM/GDM. I have
Electronics Forum | Mon Jul 20 22:07:21 EDT 2009 | mika
Hi, I just read your post. I think I know what's your problem is. In the DEK 265 (I assumed that is the model?)There is a special card for such things. For. ex. Fuji interface, Panasonic, Siemens, and UIC SMPI - interface. Uninerversal has therir own
Electronics Forum | Wed Dec 08 23:53:35 EST 1999 | Mike Eskridge
Yes, there are several conveyor companies that make a conversion box for SMP1 to SMEMA and SMEMA to SMP1. Basically they are just to differant standards for cable conections between machines. SMEMA stands for Surface Mount Equipment Manufacturers Ass
Electronics Forum | Mon Jul 20 11:46:18 EDT 2009 | msherwood
I’m having trouble with the transfer of one board from the UIC conveyor to a DEk screen printer. They are set up for SMEMA to SMEMA but the DEK keeps asking for a aboard when it already has one. Then it will ask for one every 5-8 seconds. DO I have a
Electronics Forum | Mon Jul 20 23:06:49 EDT 2009 | mika
10 or even up from a UIC conveyor of the old model - probably SMPI is the connector from UIC fully loaded, then full SMPI, but not all of them are used. Just Good board, bad Board, send, receive acknowledge. It is possible to convert this into SMEMA.
Electronics Forum | Sat Jul 25 20:53:14 EDT 2009 | mika
Author: Jeff Subject: DEK SMEMA to UIC Conveyor Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion box
Electronics Forum | Thu Jul 23 09:30:22 EDT 2009 | dekhead
It isn't clear if it was working and stopped, or if this is the first time you've tried to make it work. If this is first try, need to confirm cards and cables on DEK, and what interface is configured on UIC. I have SMEMA cards in stock if needed. P
Electronics Forum | Mon Jul 20 12:18:21 EDT 2009 | wrongway
Hello Maybe its the sensor on the dek machine not seeing that it has a board so it just keeps asking for one.
winsouce.jpg)