Electronics Forum | Thu Dec 03 14:40:27 EST 2015 | proceng1
When we had a line that ended at an older reflow oven without SMEMA controls, I ran a momentary switch to the two pins in the connector. I push the button and the conveyor pushed the board onto the edge-hold of the oven. As a joke I labelled it "LA
Electronics Forum | Sat Nov 07 22:00:29 EST 2015 | ttheis
I've seen a few used machinery companies using manual smema interface boxes with a few buttons on them to simulate upline and downline equipment but I haven't found anyone selling them or info on them. Does anyone know where they can be bought or if
Electronics Forum | Tue Mar 29 13:14:28 EST 2005 | bobpan
Anyone familiar with making smema work on the ekra x5. I believe is was manufactured with a siemens (not smema)setup. We found the cables to make the siemens work but i am not sure if i can short a couple of inputs on the cable to make the smema func
Electronics Forum | Thu Dec 03 14:45:16 EST 2015 | ttheis
Thanks. Our older oven does have a basic PC interface but no SMEMA. Maybe I can write a short program for the oven's PC to pace the boards into the oven. I could interact with the conveyor's SMEMA interface via low-cost Arduino or something similar.
Electronics Forum | Sat Jan 17 07:25:18 EST 2004 | Andreas
I need to connect a Universal HSP (SMPI, Upstream) with a SMEMA interfact (downstream). Can anyone give me some information about the SMPI interface? Or does anyone have a schematic of a conversion box from SMPI to SMEMA? Thank you! B.R. Andreas
Electronics Forum | Thu Aug 25 06:57:41 EDT 2011 | SBecmpe
I just started with this company and the machine is being used for a different process. I am noticing small differences in the wiring that do not appear to be original. Ex. The SMEMA is missing. There are unmarked wires. Schematics would really set m
Electronics Forum | Wed Nov 06 13:27:55 EST 2013 | jeffl
Is there a schematic available online for this feeder or can anyone send me a schematic? I have an issue where the reverse does not work anymore. The switch (black button) is OK and the motor itself checks out OK. The problem is likely on the board i
Electronics Forum | Mon Oct 21 15:14:53 EDT 2019 | compit
As you can see in machine B on pins 1-2, the circuit closes - give the button / contact here. The voltage you provide most likely applies to pins 3-4. In my (and in the SMEMA standard) it looks like this:
Electronics Forum | Thu Sep 29 12:56:53 EDT 2011 | leemeyer
Smema is connected and works and the 2 machines will communicate. It seems as though the conveyor wants to see a board eveery 30 secs or so, If the upstream can give it one in this timeframe everything is good. If not it times out and the yellow butt
Electronics Forum | Tue Nov 03 22:11:38 EST 1998 | phillip hunter
| SMTnetters: | | My UIC conveyors aren't working with my: | | �Omniflow 7 Reflow (Mfg 1/95) | �Dek 265 GS | �Philips CSM | | | What can I do? Does anyone have experience with connecting UIC or other conveyors to the above equipment? On the refl
