Electronics Forum | Sat Jul 25 20:53:14 EDT 2009 | mika
Author: Jeff Subject: DEK SMEMA to UIC Conveyor Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion box
Electronics Forum | Thu Jul 23 09:30:22 EDT 2009 | dekhead
It isn't clear if it was working and stopped, or if this is the first time you've tried to make it work. If this is first try, need to confirm cards and cables on DEK, and what interface is configured on UIC. I have SMEMA cards in stock if needed. P
Electronics Forum | Mon Jul 20 11:46:18 EDT 2009 | msherwood
I’m having trouble with the transfer of one board from the UIC conveyor to a DEk screen printer. They are set up for SMEMA to SMEMA but the DEK keeps asking for a aboard when it already has one. Then it will ask for one every 5-8 seconds. DO I have a
Electronics Forum | Mon Jul 20 12:18:21 EDT 2009 | wrongway
Hello Maybe its the sensor on the dek machine not seeing that it has a board so it just keeps asking for one.
Electronics Forum | Tue Jul 21 06:23:07 EDT 2009 | Jeff
Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion boxes.
Electronics Forum | Thu Jul 23 12:59:29 EDT 2009 | msherwood
Yes it was working. We moved it to another build and it stop. Which card are we talking about. X9, SBC40.
Electronics Forum | Mon Jul 20 23:06:49 EDT 2009 | mika
10 or even up from a UIC conveyor of the old model - probably SMPI is the connector from UIC fully loaded, then full SMPI, but not all of them are used. Just Good board, bad Board, send, receive acknowledge. It is possible to convert this into SMEMA.
Electronics Forum | Thu Jul 23 13:09:04 EDT 2009 | dekhead
We're most likely looking at X9 Personality card... You can swap X8 and X9. Can't recall seeing a failure in SCB40 in the 15 yrs I've been doing this. If not the personality then the PCIB (#5) in the PC. Feel free to contact directly (dh1@dekhead.c
Electronics Forum | Wed Apr 21 14:38:30 EDT 2010 | remullis
Newer Universal Conveyors use 4 wire smema and FUJI should accomodate this protocol in its config screens. Old Universal Conveyors and some machines used SMPI (forget how many wires), You can purchase the 4 wire smema cable from UIC and conversio
