Electronics Forum | Mon Jun 16 13:57:48 EDT 2003 | James
Could anyone give me a basic profile temperature settings for a conceptronics 7 zone oven and speed? I have the first couple of zones ramped up to get to the soak temperatures. Is this correct or should I start out with low temperatures and graduall
Electronics Forum | Wed Jun 25 18:17:48 EDT 2003 | Brian W.
Water soluble pastes generally work best with a ramp-to-spike reflow profile. Check your paste manufacturer's recommended profile. There are many factors that impact your profile; board thickness, component density, buried thermal masses, board si
Electronics Forum | Thu Jun 26 09:50:05 EDT 2003 | James
To Brian W. I think I will use your concept thanks for the help and from all the others that gave me suggestions. I seem to get best results from a Low temp at first with hardly no soak and just a ramp to spike. Thanks again.
Electronics Forum | Mon Jun 16 14:39:49 EDT 2003 | stepheno
The second one is typical. The important temperature is the temperature of the joint, not the setting of the oven. The oven setting are only important because they determine the temperature of the joint. If you set the oven to 150, that will be th
Electronics Forum | Tue Jun 24 09:42:52 EDT 2003 | stepheno
The temprature for the first zone should be less as the PCB entering the oven from the ambient shop floor temprature would suffer a thermal shock from a higher temp. Experience must be gained from profiling a board with thermocouples, otherwise you
Electronics Forum | Tue Jun 24 14:13:51 EDT 2003 | James
So which one is it? I am getting confused a bit because there are so many people doing it different ways. I know with higher temperatures at the begginning you have a chance of shocking the parts but if you dont have the higher temperatures at the
Electronics Forum | Wed Jun 25 12:11:43 EDT 2003 | stepheno
We have a 5 zone oven and were starting at 150 which brought it up too fast. Even with only a 5 zone starting at 140 we get the temp up to soaking temp fast enough. ( I think too fast actually) What kind of oven do you have anyways? And I can't
Electronics Forum | Wed Jun 25 12:20:03 EDT 2003 | russ
This may make it easy, Do you really need soak? Or can you just ramp to reflow. Most pastes that I am aware of perform just as well using the linear ramp as opposed to the ramp/soak /spike. Now, out of curiosity how are you attaching the thermocou
Electronics Forum | Thu Jun 26 04:34:49 EDT 2003 | emeto
Hi James, I saw very good posts here.Now I will give you one more practical way: 1. My advice is to encrease the temperature(like your first sidgestion). Termostress is important thing so your first zone should be 120-150C. 2. The paste profile. If
Electronics Forum | Wed Apr 26 19:07:44 EDT 2017 | jincuteguy
Hi guys, so we have 3 Philip Topaz smt machine at our work place. But 1 of them just got repaired and it needs to install the DOS windows or whatever Philip Topaz has originally. So is there anyways we can copy the DOS windows or DOS based operati
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694