Electronics Forum | Fri Jun 26 19:59:07 EDT 1998 | Scott McKee
| can any body help on assembling straddle mount connectors on to a board? for information on the connector - it is a berg micropak connector 1. You need a fixture to insure the pins don't bend while inserting them on the board, coplanarity is a re
Electronics Forum | Tue Oct 30 14:39:41 EST 2001 | markhoch
Has anybody else out there had problems with SMT connectors with plastic locating pins lifting up during the reflow process? We've had several instances with several differant types of SMT connectors lifting up during the reflow process. We've even g
Electronics Forum | Tue Mar 30 08:11:42 EST 2004 | steveliu
Hi, Has anyone here get some experience with SMT connector soldering? We were having really hard time to solder this AMP 50/50 Grid connector. Every connector installed has a few pins just sit on the solder. We use AIM 293DX2B NC solder paste, 60
Electronics Forum | Wed Aug 18 06:34:57 EDT 2004 | Bernard Mulcahy
Hi , Our hardware designer wants to introduce a board with a straddle - mounted SMT connector, AMP part number 84487-1 and FCI 71292-001. This is an 80 pin connector that slips over the edge of the PCB and has 40 SMT pads on either side (at least thi
Electronics Forum | Mon Nov 08 09:45:29 EST 1999 | John Burris
Having a big problem waving these puppies, hope someone can help. I've got an 8 pin mini-din connector (like a PS/2 connector with two more pins) that has two mounting pins on each side. During wave, at least half the lot has shorts from the ground p
Electronics Forum | Fri Oct 25 12:23:49 EDT 2002 | yngwie
Hi Experts, I'm facing short problem with BGA at SRT rework in one particular BGA. It is BGA, with a metal piece at the center like a coin. The BGA is located in between two high profile press fit connectors and the short always observed at the si
Electronics Forum | Wed Oct 03 23:58:23 EDT 2018 | gaintstar
Flason SMT News: http://www.flason-smt.com/new/6-Things-to-Check-Before-Submitting-Your-PCB-Design-for-Manufacturing.html http://www.flason-smt.com/new/about-wave-soldering-machine-tin-pot.html http://www.flason-smt.com/new/Advantages-of-Design-for-
Electronics Forum | Mon Apr 12 22:25:12 EDT 2004 | davef
Questions are: * Is this 210*C peak temperature measured on the leads of the connector that do not solder well? If not, what is that temperature? * Do you have similar issues with other components on this board? * Do these floating connector leads t
Electronics Forum | Thu Aug 19 09:38:24 EDT 2004 | russ
We use a locally made fixture that uses tooling pins and a mating block to place the connector onto/into. We then use a toggle clamp to push the connector onto the board. We had to make no adjustments to stencil for our application. Russ
Electronics Forum | Mon Aug 30 02:23:35 EDT 2004 | Tommy.E
I have different connectors for volume productions. But I don't have pick and place pads for SMD assembly. Does anybody know a supplier for connector pads?
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
winsouce.jpg)
