Electronics Forum | Sat Feb 06 16:28:09 EST 2010 | mystkldy
I have some large ROHS SMT inductors that are moving during the reflow process. I have tried adding extra solder, gluing and doing both. I don't know what else to try, any suggestions?
Electronics Forum | Sun Feb 07 10:41:16 EST 2010 | davef
Makes us wonder how well the connections on the component match with the pads on the board.
Electronics Forum | Mon Feb 22 10:21:58 EST 2010 | mystkldy
We did the firt 2 with no luck.
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Sun Feb 07 11:56:05 EST 2010 | mystkldy
Makes us wonder how well the connections on the > component match with the pads on the board. The pads are actually larger than the leads on the part, but I think we may have figured it out. We believe the conveyor vibration is causing it. When we
Electronics Forum | Fri Nov 19 16:53:48 EST 2004 | grayman
Hi, We used to clean 20 pieces SMT inductors before but no problem with this process. Please confirm what type of inductors is it SMT or hole type. What type of chemical and machine you are currently using? Maybe I can help you out.
Electronics Forum | Wed Nov 17 08:13:41 EST 2004 | grange GAA
We are manufacturing an NPI board for a Customer and they want us to wash the board using a Saponifier wash. However, one of the SMT parts cannot be placed through a wash process. Has anyone ever had to encapsulate a component to prevent water da
Electronics Forum | Thu Nov 18 12:00:00 EST 2004 | Shean Dalton
Have you considered mounting this component after the assembly has been washed. Then, mounting the component and cleaning its solder joints individually. Alternatively, have you considered using alternative cleaning solutions to a saponifier (and a
Electronics Forum | Mon Aug 07 21:59:10 EDT 2006 | davef
It's inductor [choke] number 511. Probably used for EMI suppression on the monitor line. Look here: * http://www.antennex.com/shack/Dec99/beads.htm * http://lists.contesting.com/_topband/1998-11/msg00165.html *
Electronics Forum | Wed Aug 09 04:06:47 EDT 2006 | Rob
Bourns is quite a high end name in the electronics industry & you usually pay a premium for percieved Swiss precision engineering. If your card is far east built it is much more likely to have an inductor on from Murata, Panasonic, or one of the Chi
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
.gif)
winsouce.jpg)
