Electronics Forum | Mon Aug 23 13:39:30 EDT 2004 | ozzy
I think the first is a .1uF because it is being used as a charge pump cap on a max202cpe.
Electronics Forum | Wed Sep 01 09:28:20 EDT 2004 | Phil
Ozzy, it is a 1uf cap, not a .1. The 5 indicates 5 zeros after the 1. The MAX-232ACPE uses .1 uf caps. You indicated that it was not the "A" version. phil.hopkins@apcc.com
Electronics Forum | Mon Nov 05 13:33:08 EST 2007 | slthomas
Heck no, I mean we print relatively slower on complex boards, as in 1 inch/sec (25.4mm/sec), and maybe 2 inches/sec. (51mm/sec) on less complex boards. SMT is not a bottleneck in our plant and printing never the bottleneck in SMT, so I see no need t
Electronics Forum | Sat Nov 17 12:58:12 EST 2007 | mika
I agree with previous postings regarding print speed: Solder paste type/versus fine pitch. Question: Is this a double sided pcb with fairly easy component packages on both sides? In such case, consider make the panel like this: Every second pcb in
Electronics Forum | Wed Jun 03 13:50:32 EDT 1998 | Chrys
| Can anyone tell me if there is a reference for smt component height specs on the bottom side of a board, which will also go through wave soldering. A current design I am reviewing has tant caps(7343) and a crystal on the back side. Should I only b
Electronics Forum | Tue Nov 09 04:21:11 EST 2010 | bising
Hi SMT World, I am facing a technical challenge related to an SOIC 14lds with thermal pad on it's belly that needs to be soldered onto PCB, together with leads. It is a 50 per board, expected 80% solder load on every one. We have some units without
Electronics Forum | Thu Mar 30 10:16:46 EDT 2017 | max83
Hello Tim, Send me pls you personal mail. Or write me maksim@smt-max.ru Best regards Max
Electronics Forum | Wed Dec 18 15:58:25 EST 2019 | majelacquinn
I am looking for recommendations for a table top reflow system that can do lead and lead free solder. Has anyone tried the SMT-2011 Desktop system sold by SMT max? Any of the manncorp/LPKF systems ect?
Electronics Forum | Tue Feb 03 02:55:04 EST 2015 | max83
Hi, > > We have a snap-off issue. I guess it can > be linked to z calibration. > Hi, > > We have a snap-off issue. I guess it can > be linked to z calibration. > Hi, > > We have a snap-off issue. I guess it can > be linked to z calibration.
Electronics Forum | Tue May 09 18:41:54 EDT 2006 | SMT_CNC
It is a very simple practice to leave a leader when breaking down a setup. This way the next time you're going to use the reel there is about a foot of cover tape to use. Seems to work in our SMT production area. Max.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
