Electronics Forum | Fri Mar 29 20:07:50 EDT 2019 | sarason
I measured the temperature rise when I built the unit and it has a nice linear rise in temperature over the 3 minutes. I have used the Quikees before. The galcon gas stinks and must be evacuated. The galcon is expensive. The galcon is a perflourocar
Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
Electronics Forum | Tue Jul 14 01:48:43 EDT 2015 | buckcho
Hello. I used Heller before - very stable oven, I had zero problems. Maintenance is also very easy. I also think they are not so expensive. You have to look at the power consumption and N2 if you are going to use it. Some ovens can trick you with low
Electronics Forum | Fri Oct 22 10:00:11 EDT 2021 | smtconnie
Hi dear, We are professional manufacturer of PCB handing machines, reflow oven, wave soldering ect in China. We also supply after service oversea. If you need any product or message welcome to contact us! :) email: smt20@smt11.com
Electronics Forum | Mon Mar 12 22:02:20 EDT 2007 | Narksh
i i'm new in this of smt, i know how to solder a circuit manually but i need to know all the process and all the needs to made a smt impressed circuit what else i need to made a manufacturing line apart than: stencil printer, pick and place sistem a
Electronics Forum | Sat Aug 10 22:23:10 EDT 2019 | halfslice
Hello, I recently had to leave an SMT job because of the fumes generated from a reflow oven. Smoke poured out of the oven and left a tar-like yellow residue on everything near the input and output side. Its been two weeks since I left that job and I
Electronics Forum | Mon Jan 06 10:10:35 EST 2020 | emeto
If it is not your power supply being wrong, check if you have UPS inside oven working properly.
Electronics Forum | Wed Oct 19 11:43:16 EDT 2005 | dougs
Ken is right about the BTU VIP's, we have 2 both about 6 years old as well, i've been here 1 1/2 years and only replaced a 15V power supply on one of them, no other issues at all.
Electronics Forum | Thu Jan 10 06:04:13 EST 2002 | Matt Kehoe
Thanks for the suggestion. We got the machine up and running yesterday morning. Turned out to be a power supply to the boards that control heaters and rails/conveyor. She ran great all day and hopefully will be a "hapy oven" from now on. Thanks a
Electronics Forum | Mon Nov 15 10:43:23 EST 1999 | Brian W.
I think the issue may be more than just the oven. I worked at a facility in Florida, where lightning strikes were common. We installed backup generators for the facility. Among the issues and costs we analyzed were: frequency of outages, boards i
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
