Electronics Forum | Wed Jul 04 02:05:33 EDT 2018 | ali_jayyad
Thanks for your reply, but I have figured it out. It represent library of specific part in EAGLE software.
Electronics Forum | Thu Jul 26 09:14:17 EDT 2018 | teresat2
When the PCB is finished, it must be mainly tested. Mark the broken plate of the short-circuit broken wire, or SMT may fix you later. In the case of Mosaic, the same location of the bad packaging together. Next is SMT welding commonly, want to look f
Electronics Forum | Fri May 11 11:18:16 EDT 2007 | rgduval
Their response time here has been excellent. Then again, their main US office is only an hour away from us, so, that may skew my opinion of their response time. Cost is average. Around $120/hour, plus travel and parts. Registering is an issue. T
Electronics Forum | Tue Feb 27 20:42:56 EST 2007 | pyramus
Hi anybody have experience with the Package on Package BGA components. I mean BGA over a BGA component assembly. Our R&D is requesting us feedback for the future usage of this part. Need to gather some info on possible SMT issues for usage of this B
Electronics Forum | Wed Feb 22 21:21:09 EST 2023 | cbeneat
One expense reduction is to order parts from SMTXTRA. I am not affiliated at all with them; however, I buy from them as much as possible. Usually 30-40% price difference from Panasonic. Example is the waste bins for Panasonic NPM's-$183.49, Last time
Electronics Forum | Fri Feb 24 18:25:09 EST 2023 | stephendo
The single most common problem I have seen is not always having ready to run error free kits for SMT waiting at all times. It eats into SMT production a lot more than most people think when there is even a single question about a part. At one OEM we
Electronics Forum | Thu Jun 28 09:43:25 EDT 2012 | ssupertuba
I'm sorry. These are SMT caps such as a C0805C271J1GAC. Small 0805 caps. I know they gennerally give you solder balls that sit on the side of those parts but they wash off.
Electronics Forum | Mon Jul 02 08:53:41 EDT 2018 | tsvetan
you have to ask the one who made up these my guess is NO = noname supplier, MP = major brand but this is just speculation
Electronics Forum | Wed Feb 07 13:44:09 EST 2007 | dsoohoo
After some precursory experimentation, I am planing on employing a form of low melting temp solder for use in reworking some very dense, copper core PCB's, both SMT and THT, which were originally mounted with 63/37 solder. The main problem with the
Electronics Forum | Thu Nov 01 17:35:04 EST 2001 | davef
A couple of things: * Don�t do it. Securing both the plastic case and the lead to prevent breaking the case seal is very difficult to do while you reform the lead. Just resell the parts and buy the correct parts. * If you will not listen and insist
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694
