Electronics Forum | Tue Feb 05 14:41:45 EST 2013 | mowens
I am looking for a nice storage rack for foil type stencils, not the frame type. Some thing compact yet easy to work with. Any directions/advice. Thanks in advance.
Electronics Forum | Tue Feb 05 19:25:54 EST 2013 | swag
We have a few Bliss racks. They were made for 29x29 frames but we use them for vectorgaurd and foil. DEK ships vectorgaurd stencils in a nice, thin cardboard box. We use these boxes for storing vectorgaurd + foils. You can store a handful of foil
Electronics Forum | Wed Feb 06 12:52:44 EST 2013 | mowens
That is a good idea, I was able to find the big file folder before, I can't even find those now. I thought I saw one that had little sliders with hooks to hang the stencil from. Thanks for the info.
Electronics Forum | Tue Dec 09 10:58:12 EST 2014 | rgduval
I've always assembled those style connectors by hand. They require paste on both sides, correct? With that variable, I've never considered trying to do them with paste/reflow. Cheers, ..rob
Electronics Forum | Wed Dec 03 10:44:03 EST 2014 | kkay
We have a smt connector on side one of our pcb that overhangs through the board to the second side. We can't figure out how to print the second side with this part sticking out. Unfortunately we cannot run the second side first due to an LGA that has
Electronics Forum | Wed Dec 03 11:55:42 EST 2014 | spoiltforchoice
I think there are several answers: 1)Design Fail - slap whoever created it 2)Fit that connector as a manual process after the PCB is finished. 3)Print side 2 using a jet printer 4) Shield the fragile LGA and reflow it twice anyway. 5)Use a thicker PC
Electronics Forum | Tue May 04 10:59:23 EDT 2004 | Evtimov
Hi, It depends of your boards(are they for SMD or not) and how many boards you assemble. The process at all is like that: 1.Stencil printer - to adjust the paste 2. Pick and place machine(for your quantity) 3.Reflow oven Theese are the machines you
Electronics Forum | Tue Feb 02 22:57:32 EST 2021 | pnguyvu
Hello Charliem, Contact Steve Yen ( Steve@usastencils.com )at USA STENICLS INC. He'll give you better idea overprint or step . He has solid experience in design smt stencil. We've been receiving very good stencil from Steve.
Electronics Forum | Thu Jun 23 10:06:10 EDT 2011 | davef
Leave it to the Eurolanders to come-up with a goofy, confusing name for something simple. Stepped stencils are chemical etched or laser cut. IPC-7525 provides guidelines on designing stepped stencils. Look here http://www.ipc.org/TOC/IPC-7525.pdf
Electronics Forum | Fri Oct 14 14:09:19 EDT 2005 | bschreiber
Your problem is not the 0.4 pitch. Your problem is the manual cleaning. Manual cleaning will only remove the solder paste from the surface of the stencil. What's more, manual cleaning will force additional contamination into the 0.4 pitch apertures
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
