Electronics Forum | Wed Nov 20 21:30:36 EST 2019 | sssamw
first of all, you need check the strain caused by interference during connector insertion. If must done by SMT, then a claw would be better than nozzle.
Electronics Forum | Sat Aug 21 15:02:32 EDT 2010 | jry74
I have a pcb with 750 plated through holes that get Holtite sockets inserted into them. I have a method of pressing in 10 sockets at a time. However, when we are done, the board has bad warpage on the X and Y axis. Does anyone out there have any t
Electronics Forum | Tue Aug 24 17:59:10 EDT 2010 | davef
A board support must be used to prevent bowing of the board during insertion of the sockets. It should have a flat surface with holes or a channel large enough to receive the sockets during installation. [Tyco AUGAT HOLTITE Socket Application Note 11
Electronics Forum | Fri Dec 13 10:23:55 EST 2002 | davef
Bright ideas??? Bright ideas!!! I got bright ideas. In order of decreasing luminosity: * Stop installing the socket, solder the PLCC to the board, dip the board. The socket is a waste of time and money. You never replace the PLCC in the field, a
Electronics Forum | Thu Sep 02 20:39:39 EDT 2010 | Jacki
Hi davf Our process is the manufacturing burn-in-bord, SMT,insert sockets, wave and touch up. 1 board needs 0.1UF about 3k+ components.Kemet recommanded to use the reflow machine for Ceramic Cap when i chked its website.
Electronics Forum | Fri Sep 01 13:29:15 EDT 2006 | fastek
I agree Craig and I'm also not convinced DEK is really doing that well. I know they sell a ton of printers into Asia at around a 30%-40% discount to what they sell them anywhere else. A classic case of grabbing market share at the expense of profitab
Electronics Forum | Fri Apr 24 11:00:36 EDT 1998 | Francisco Becerra
I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for
Electronics Forum | Fri Apr 24 10:59:59 EDT 1998 | Francisco Becerra
I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for
Electronics Forum | Mon Nov 15 14:24:17 EST 2004 | nrocco
Im looking for equipment that can attach solder balls between the size 15-25 mils to the leads of a land grid array. There is also the posibility of attaching balls before leads are inserted into the socket. This is a little differant than attaching
Electronics Forum | Sat Apr 25 01:26:52 EDT 1998 | Mikec
| I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. | I am looking
