Electronics Forum | Thu May 03 22:51:14 EDT 2007 | jmelson
I am still learning the CSM84, but have gotten one board programmed and working. Now, I'm doing the next board, and need to use the mechanical alignment unit for a 22 x 22 mm TQFP. This chip is too large to clear the jaws on any head. Can the CSM h
Electronics Forum | Fri Aug 31 16:30:27 EDT 2007 | gmoritz
> > you may wish to do program off-sets per rotation ... I responded: > > You went over my head with that one. ... Steve Thomas helpfully added: > ... can reach that screen with SH SET command, Since I have not yet located a programming manual
Electronics Forum | Tue Oct 20 10:31:50 EDT 2009 | lloyd
Seth, From the Siemens technical information document: Raceway monitoring detects incorrect positioning of the Z axis with respect to the raceway during motion of the star. This is done by monitoring the current drawn by the Z axis while the star i
Electronics Forum | Thu Nov 19 14:38:49 EST 2009 | doremi
Oh, my dear, printer is just a part of the full picture. Without good and stable pick and place what if the printer is excellent???It is all important - printer, solder paste,stencil,P&P,oven,AOI and of course good process engineers or whatsoever are
Electronics Forum | Thu Jul 18 15:03:54 EDT 2024 | SMTA-64387939
Reusing paste that has been on the stencil for long periods of time can be a little tricky. Depends on the formula, environment that its used in, quality issues, technology being printed. Throughout the shift, new paste needs be added as its bein
Electronics Forum | Mon Aug 27 16:51:14 EDT 2007 | gmoritz
I'm updating this thread and replying to the first post in the thread due to the annoying tendency for later posts to get indented to the point that you can only put one or two words per line. Our Rad 5, hit the skids again for the last couple of w
Electronics Forum | Wed Dec 03 06:04:10 EST 2014 | spoiltforchoice
Manual placement aids are often very similar, I would suggest it is quite difficult to tell them all apart. Most of them include some kind of carousel for bins of loose parts and have the option of a few tape "feeders". If you are building small volu
Electronics Forum | Mon May 06 12:44:50 EDT 2002 | Bob Willis
The SMART Group is starting a new project on PPM Monitoring which will be providing average PPM yield data per month free to the industry. I would like to get feedback or exchange criteria for paste printing as non exists with in IPC or similar organ
Electronics Forum | Mon Jul 17 13:37:35 EDT 2006 | carln
Here is something I copied from Circuitnet.com. This appears to answer your question and then some... http://www.circuitnet.com/experts/ Ask the Experts Jul 17, 2006 What type of cleaner method is preferred for lead-free stencils? What type of s
Electronics Forum | Sun Sep 19 03:29:55 EDT 1999 | Brian
| | | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | | | ...or 10 mil? | | | | | | | | | | | 1 mil= .001 inches | | | 10 mil= .010 inches | | | Also, it has nothing to do with metric. | | | | | | I was also