Electronics Forum | Tue Aug 17 14:08:50 EDT 1999 | Glenn Robertson
| We have a design on which there is an ASIC that will not be produced anymore in the future. As we want to make this design over the next 10 years we are evaluating the possibility to buy the necessary ASICs for the next 10 years. This will give us
Electronics Forum | Thu Aug 05 08:39:26 EDT 1999 | Wayne Sanita
| | | Hello, If you are using no-clean and they are entrapped in the flux it is also IPC accepted but i havent found a customer yet who agrees with that. Im sure you have checked your profile. I had the same problem with chip components but after c
Electronics Forum | Thu Jul 22 11:09:06 EDT 1999 | KWilliams
Hi Does anyone have the details for whoever is the distributor of KOKI Pastes in the UK ? Thanks KW
Electronics Forum | Fri Jul 16 10:55:54 EDT 1999 | Jeff Ferry
We have been asked to rework several thousand bare circuit boards. A design change now requires 2 chip components where 1 was originally required. Round test pads near this area will be used to complete this circuit rework, however these test pads a
Electronics Forum | Thu Jul 22 03:58:28 EDT 1999 | George Verboven (Process Engineer)
| We have been asked to rework several thousand bare circuit boards. A design change now requires 2 chip components where 1 was originally required. Round test pads near this area will be used to complete this circuit rework, however these test pads
Electronics Forum | Thu Jun 24 09:57:44 EDT 1999 | Vic Lau
Dear guys, I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now using a no
Electronics Forum | Thu Jun 24 10:11:33 EDT 1999 | Dave F
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 16:19:46 EDT 1999 | Kennyv
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Thu Jun 24 16:23:18 EDT 1999 | Kennyv
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Mon Jun 14 09:16:54 EDT 1999 | C.K.
| Dear All, | | We are having a big debate over what is the industry standard in DPPM on the wave sodlering process. is a DPPM of about 800 satisfactory. As per our big bosses it should not be more than 50 DPPM. Is the figure realistic. We are ty