Electronics Forum | Sat Dec 15 06:34:54 EST 2012 | sowmya
Normally paste manufacturer specifies stencil life of a paste is 10 hours. the question is, if i run a continuous manufacturing for 40 hours, we will be adding 250 g of paste for every two hours. The addition of 250 g will be mixed with the paste whi
Electronics Forum | Fri Nov 14 10:45:22 EST 2014 | tombstonesmt
We use both types in house. We started with a board moving over the pot, slowly moved on to Jade machines and eventually Synchrodex. Like you mentioned without palletizing you'll have component movements during the cylce and most likely won't have th
Electronics Forum | Fri Jul 04 09:01:49 EDT 2003 | davef
You should see a coarse silverish / grayish coat on the termination that indicates that it soldered. We have to opinion [don't know] about the strength of solder connection versus the strength of component terminations.
Electronics Forum | Thu Mar 08 14:17:56 EST 2001 | Fred Jung
My company is planning on utilizing SMT on a new product line. We would like to have several of our production people trained on SMT solder rework and repair. Can anyone suggest an appropriate training class in the New York metropolitan area?
Electronics Forum | Tue Mar 09 12:57:43 EST 1999 | Jan Pasternak
I want to identify a pre-production prototype test house to evaluate new parts in the Chicagoland area. Capability of running high speed pick and place and soldering components to test board.We will submit boards and parts.
Electronics Forum | Thu Nov 22 09:14:06 EST 2007 | paulallan
Does anyone have any experience in point to point laser soldering and laser light reflecting off of SMT component 'J' leads down on to the laminate. This appears to be a random situation we cannot understand nor control.
Electronics Forum | Mon May 01 10:55:21 EDT 2017 | tombstonesmt
This has already been done. Companies like Seho Selective Solder machines can provide this service. I imagine it is not cheap. I'd be curious to compare the drop rate of parts per person per hour on a couple of Pillarhouse Jades vs on custom machine.
Electronics Forum | Tue Aug 01 16:33:08 EDT 2000 | Ron Lasky
Jason, it looks like you have several options that have strong promise of working. I suggest you perform a designed experiment to find/optimize the best solution with these suggested approaches. Ron
Electronics Forum | Thu Apr 06 07:53:35 EDT 2000 | jacob lacourse
I have also come across this very same problem and found that our screen vendor made a mistake on our screen. Check the thickness of your screen it should be about six thousandths if it's eight thousandths then you are most likely depositing to much
Electronics Forum | Thu Mar 23 13:44:29 EST 2000 | Russ
Mark, Try contacting Electrovert/speedline. I believe that they are marketing one. I don't know if this is the right guy to call but give it a try. Bob Galvin - Regional Service manager Western region 408-727-4650 Russ
