Electronics Forum | Tue Sep 23 20:56:08 EDT 2008 | davef
For additional information, download IPC-7526 - Stencil and Misprinted Board Cleaning Handbook http://www.ipc.org/html/IPC-7526.pdf
Electronics Forum | Tue Sep 23 07:27:31 EDT 2008 | realchunks
Do not wipe the board at first before putting it in your cleaner. It will leave more paste in your tank, but you won't smear it into every corner of your solder resist. We found that only our stencil cleaner would clean a board properly and leave n
Electronics Forum | Sat Aug 11 13:37:02 EDT 2007 | shing
I am a fresh SMT engineer. I am now facing a problems, solder contamination on Golden Finger nearly about 1 year. I don't know what going on. I have checked the cleaningness of stencil, solder paste handling,IR re-flow profile and even PCB surface
Electronics Forum | Mon Nov 13 14:58:56 EST 2017 | davef
Determine the origin of the solder * Sloppy paste printing technique * Lax stencil underside cleaning practices * Sloppy misprint cleaning practices * Poor part placement practices creating solder balls * Poor material control allowing solder p
Electronics Forum | Mon Dec 11 17:09:27 EST 2000 | Michael Parker
Get a profiler for your oven. To say "we are not sure" and "we think it might..." shows you are running with a WAG (Wild Ass Guess). Not a good place to be if you intend to produce anything reliable, with quality. Run your profile and verify that yo
Electronics Forum | Wed Dec 13 19:40:38 EST 2000 | Jerry Wetzel, SME, EM/SME
Your profile must be precise, your stencil aperture sizes and shapes are very important, and the size of the pads on the boards should be very close to what the part manufacturer recommends. We had some trouble with hi-temp paste, and discovered tha
Electronics Forum | Tue Jul 19 09:18:14 EDT 2011 | davef
Could this be an opportunity to explore the use of cartridge-type paste dispensers? Or maybe a reason to keep working over the weekend. * Re-Storing & Re-Using “Used” Solder Paste. Though not a recommended practice, used solder paste from the stenci
Electronics Forum | Thu Aug 06 09:51:20 EDT 1998 | Bob Willis
This text may be of interest to any one with tin lead spots Guide to Solder Spots - A New Plague in Manufacture ? So what are solder spots ? They appear to be the next big problem in modern reflow assembly in fact in any process that involves solder
Electronics Forum | Thu Jul 20 05:04:30 EDT 2006 | bing007
We had a similar problem with gold contact pads. Cleanliness is paramount. If you are using foil tensioning system, wash the foil in a stencil wash before use as the cardboard cassettes may be contaminated. Be very careful when loading into a frame f
Electronics Forum | Thu Mar 31 17:09:43 EDT 2011 | Mark
I would suggest doing an aperture reduction on your stencil or move to a thiner stencil.Please check that your housekeeping related to stencil cleaning is monitored.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
winsouce.jpg)
