Electronics Forum | Tue Dec 31 02:13:14 EST 2019 | agoesfirmanto
This PCB model has been in production since 2018 and stopped production almost 1 year ago, now it has started production again and I found this problem. at the time of production in 2018 this problem did not occur. while the parameter settings do not
Electronics Forum | Thu Jan 02 07:04:57 EST 2020 | dontfeedphils
Pretty large solder-ball. Looks like it may have come from the ground pad since it's so large, in which case I would reduce the print coverage on the middle/ground pad and see how it works for you. You verified that these parts have the groundpad a
Electronics Forum | Thu Jun 06 09:28:24 EDT 2002 | Hussman69
Sure do, it's from the paste that gets squeezed under your R's and C's. This paste is now on your mask and during reflow, wants to move off the mask. Unfortunatly, it follows the flux residue to the side of your component. An easy fix is to use th
Electronics Forum | Tue Dec 31 10:06:37 EST 2019 | emeto
This one is easy. Go to 5mil stencil and reduce apertures in width. try to have 10mil aperture width and 10 mil distance in between. If you give us numbers we will be more precise.
Electronics Forum | Mon Jun 21 01:32:20 EDT 2021 | yaxindatech
We can reproduce a prototype for you, if the defect can not be repaired. We are a PCB manufacturer in shenzhen China. It can be manufactured as a sample order in 2-3 working days.
Electronics Forum | Thu Jun 06 15:55:28 EDT 2002 | arzu
I agree with the others and experienced the problem myself this week. Solderballs at the side of the chips. I looked at the board and found that the chip is pressing the paste away too much. This in combination with our quite big pads(and stencilaper
Electronics Forum | Tue Jun 04 17:21:22 EDT 2002 | jasonfang
I found solderballs are around chip components (on one side of middle area), I checked gerber data, solder paste of aperture on the stencil for these chip components have 5% reduction to solder land on PCB, shape of solder land are square, not home p
Electronics Forum | Tue Jun 04 20:34:28 EDT 2002 | russ
Jason, Excessive thermal ramp rates, misprints, improper pad design, paste type, placement pressure, all can cause solderballs. Do the pads on this board meet IPC 782 criterias? I have found that too much pad underneath component can cause this. A
Electronics Forum | Thu Jan 02 10:31:48 EST 2020 | slthomas
It is strange that you're having issues while using the same process parameters (including stencil) that worked successfully before. It doesn't guarantee that it's not one of those parameters changing in a manner that's not apparent, but it does sugg
Electronics Forum | Thu May 26 21:13:17 EDT 2005 | thaqalain
Factors that affect the solder joint quality are *envirinmental condition(i.e.,humidity) *contamination *Flux residues *all of the above
