Electronics Forum | Thu Oct 07 16:57:02 EDT 1999 | Glenn Robertson
| | I have a board, 4 spacers needed to be soldered on the board | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there wi
Electronics Forum | Fri Oct 08 10:08:48 EDT 1999 | Glenn Robertson
| | | | I have a board, 4 spacers needed to be soldered on the board | | | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first,
Electronics Forum | Tue Jan 16 07:17:20 EST 2007 | adamp
I have checked pot temperature in different parts of solder pot and it looks like it is correct (250C). I have also lowered solder pot temperature and removed copper from the surface of the solder pot (operation repeated couple times). There is still
Electronics Forum | Mon Dec 13 09:43:28 EST 1999 | Chris May
As Wolfang says about slightly bent legs, handling is of the essence. Are these devices decanted into another tray for your machine. It may be worthwhile doing a "movement" chart for these components. Do not explain why or when you are doing it beca
Electronics Forum | Mon Jan 15 03:42:08 EST 2007 | adamp
Hi all, Last week I have noticed, that solder changed colour in our Soltec wave soldering machine. I am using normal 62Sn37Pb alloy and it's colour changed to violet/darkblue with gold areas. I know that gold colour means that, there is to much Cu i
Electronics Forum | Thu May 26 08:52:42 EDT 2011 | davef
Phil Zarrow wrote a useful paper that could help in evaluating paste. Here read it ... Evaluating Solder Paste � Not An Option Contributed by Phil Zarrow of ITM an Independent SMT consulting firm With soldering being the dominant source of assembly
Electronics Forum | Fri Jan 19 11:34:13 EST 2007 | realchunks
I thought the same thing but he did mention density. I threw out the color thing immediately - which is normal. But to NOTICE a density proble with set programs seem aby-normal. Unless one our maintenance guys got a hold of your machine for a PM.
Electronics Forum | Mon Jan 15 13:38:29 EST 2007 | realchunks
Check the temp of your pot. It may be getting cooler if you can notice a difference in pump height and density. You may have lost a heater element or two. You can adjust your pot chemestry, but why would you want to if your solder sample came back
Electronics Forum | Fri Aug 18 05:43:51 EDT 2000 | Richard Berry
Thanks Wolfgang / Charles Have tried method suggested by Wolfgang on one product, and seem to be a bit over (perhaps density calculation was a bit out). Also, the volume of paste deposited must be less than the voume of the apetures on the stencil b
Electronics Forum | Wed Aug 13 11:13:03 EDT 2008 | mbnetto
Hello... I need to calculate the solder paste quantity that I'll need for a new product and I need the density of the solder paste Cookson OM338PT. Can anybody help me? Thanks!
