Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Tue Jul 16 08:39:05 EDT 2013 | cyber_wolf
The screwdriver can scrape pieces of the plastic jar off and contaminate the paste if you aren't careful.
Electronics Forum | Tue Jul 16 09:03:26 EDT 2013 | dontfeedphils
Just pick up some of the plastic putty knifes, pretty cheap.
Electronics Forum | Tue Jul 16 23:29:53 EDT 2013 | vishnudas123
Dear Sir, Thank you very much for your suggestion.
Electronics Forum | Wed Jul 17 00:19:24 EDT 2013 | vishnudas123
Dear Sir, Thank you very much for your suggestion.
Electronics Forum | Tue Jul 16 07:26:55 EDT 2013 | vishnudas123
Dear all, can we use metal screw driver for mixing of solder paste.what are the disadvantages. please tell me.
Electronics Forum | Tue Jul 18 18:08:08 EDT 2023 | davef
Vote for: JBC DPM Paste Dispenser Manual Also consider: Metcal 910-MSG Manual Syringe Gun-Kit Spoty micro-dot solder paste syringe dispenser [ https://www.tindie.com/products/avandalen/spoty-micro-dot-solder-paste-syringe-dispenser/ ]
Electronics Forum | Tue Jul 18 16:14:45 EDT 2023 | daniel_stanphill
I remember having seen an ad on LinkedIn or somewhere that showed a handheld pen capable of manual deposits even on 0402 and 0.4mm fine pitch pads. I have been trying to search for it today and am seeing some comparable products but nothing that look
Electronics Forum | Mon Dec 22 12:14:15 EST 2008 | pcbbuilders
we sometimes have problems with solder paste release. we use a manual stencil printer. does anyone have any thoughts on using two passes of solder paste on the stencil? i have found that running the second pass gives me better deposits on the fine pi
Electronics Forum | Tue Dec 23 17:34:07 EST 2008 | davef
We hear you talking two main issues: 1 Solder paste release 2 Thoughts on using two passes of solder paste on the stencil 1 Solder paste release * Check your aperture & aspect ratios [Search the fine SMTnet Archives for more] * Do a better job with
winsouce.jpg)