Electronics Forum | Wed Feb 22 08:31:42 EST 2006 | davef
Q1 Are there any standard regulating the subject? Very few infos found on IPC. A1 We�re unaware of standards for packing and storage for most types of boards. * IPC 4553 standard for Immersion Silver Finish, 3.8 Packing and Storage. * J-STD-033 and E
Electronics Forum | Wed Oct 20 10:41:22 EDT 1999 | Eric Lerz
Our company (assembler and user) has experienced some board problems relating to warpage and solderability. The manner in which they are packaged by our fabricators and stored in our stock prior to assembly has been questioned (as one of many factor
Electronics Forum | Fri Aug 08 07:27:43 EDT 2008 | lonta96
Hi, I'm from a semiconductor package assembly, and currently looking for an offline solder paste inspector capable of true volume measurement. Any recommendation for a machine that can measure paste volume on a leadframe (metal substrate)? I found
Electronics Forum | Thu Apr 29 17:35:17 EDT 2004 | Shinmoto
Hi there, We place FBGA packages on a lot of our memory modules. Our stencils have .013" square apertures and a .005" foil thickness. We are using a type 4 paste from Senju Comtek. The price difference is not that significant and readily available
Electronics Forum | Sun Apr 25 10:28:46 EDT 1999 | Joe Cameron
Hello all, Been doing some comparisons on joints made using the soldering iron versus reflowed solder paste (on a QFP package). The difference is quite significant: the joints made by the soldering iron are inconsistent and in many cases not filled
Electronics Forum | Thu Aug 19 12:01:26 EDT 2004 | erhard
We want to get a process running to print paste with a thicker plastic stencil with some room left underneath for preassembled components. I know DEK offers these stencils but since we are using an MPM printer they don't want to sell to us stencils f
Electronics Forum | Wed Feb 11 00:34:42 EST 2015 | comatose
There isn't going to be much worthwhile used equipment out there if you mean true jetting - it is a pretty recent process. There are lots of used stencil printers out there, so from an up-front cost perspective, stencil wins. Jetting is slow. A hig
Electronics Forum | Thu Dec 10 09:06:47 EST 2009 | stepheniii
Just how cold do you store your paste? And what are your solder paste reps like? Here they fall over each other giving support for their paste. And have you seen the problem with flux separation or have you only heard about it?
Electronics Forum | Tue Dec 08 08:52:42 EST 2009 | cunningham
How do people prepare there solder paste for screen print? We currently remove them from the fridge and mix them in a 500g solder paste tub mixer to mix the flux and paste together we waste to much paste at the moment as we only use the tub for 1
Electronics Forum | Mon Dec 14 18:45:08 EST 2009 | gregoryyork
why not use a paste where it requires no refrigeration at all cheers Greg
winsouce.jpg)