Electronics Forum | Thu Oct 07 18:24:01 EDT 1999 | Jason Gray
Make sure you check the MSDS for the new paste. If you have more than one production line, I'd suggest a gradual changeover. One selling point for management would be the free training Multicore will give you for the switch. If you haven't already
Electronics Forum | Thu Oct 07 20:43:16 EDT 1999 | Dave F
| Make sure you check the MSDS for the new paste. If you have more than one production line, I'd suggest a gradual changeover. One selling point for management would be the free training Multicore will give you for the switch. If you haven't alrea
Electronics Forum | Thu Oct 07 21:07:45 EDT 1999 | Bix
| | Make sure you check the MSDS for the new paste. If you have more than one production line, I'd suggest a gradual changeover. One selling point for management would be the free training Multicore will give you for the switch. If you haven't alr
Electronics Forum | Fri Jul 09 17:50:20 EDT 1999 | Jim Blankenhorn
Hi Carol- What you are asking for can be done. Variables you must account for include the paste viscosity, dispensing head speed, dispenser height relative to board surface, and needle size. You can use most any semi-automated system such as Camalo
Electronics Forum | Thu Feb 24 22:32:56 EST 2011 | rstadem
PKannan, Your opinion is contrary to J-STD-005 "Requirements for Soldering Paste". Within that document is included specific requirements for re-certification of expired solder paste. Paste that is expired can be used after a simple viscosity test an
Electronics Forum | Tue Apr 06 20:28:41 EDT 1999 | Scott McKee
| I need help in finding solder paste measuring equipment. | Height, length, width, area, volume after printing (off line): 1. Cyberoptics:1-800-745-6315 www.cyberoptics.com 2. Manix Manufacturing 1-215-953-9797 3. Theta Group 1-205-650-0535 4.
Electronics Forum | Tue Feb 22 11:53:16 EST 2000 | JAX
Sal, To answer your first statement; Yes, you can cure paste and reflow solder using one profile. Question on your second statement; Are you talking about running passive side glue, flipping it over, running active side solder, and then putting the
Electronics Forum | Tue Feb 22 11:53:16 EST 2000 | JAX
Sal, To answer your first statement; Yes, you can cure paste and reflow solder using one profile. Question on your second statement; Are you talking about running passive side glue, flipping it over, running active side solder, and then putting the
Electronics Forum | Fri Feb 25 02:30:32 EST 2011 | pkannan
Dstadem, Thanks for bringing your in valuable experience with the J STD 005 " Requirements of Solder Paste". I fully agree with you that the Solder Paste can be qualified for shelf life by doing simple viscosity test and visual inspection for coal
Electronics Forum | Wed May 12 12:22:38 EDT 2004 | solderpro
I agree with the guy about cars, boats, ect... ok, I like as some have said without a doubt, DEK top of the line.... pick and place, love siemens but software is not user friendly, myself, JUKI all the way, great equipment, great software, that mean
.jpg)
