Electronics Forum | Fri Mar 31 15:58:07 EDT 2017 | jutikagokarn
Thank you for your response. We build boards on an SMT line that is shared with other companies too and are currently using water soluble flux based solder paste on both boards. We realized an issue with washing on one of the boards so requested to
Electronics Forum | Fri Mar 31 17:13:04 EDT 2017 | dontfeedphils
Clean everything to do with the print process during the switch adequately and you shouldn't have an issue.
Electronics Forum | Fri Mar 31 18:10:21 EDT 2017 | jutikagokarn
Thanks Phil! I appreciate the response!
Electronics Forum | Fri Mar 31 11:56:36 EDT 2017 | jutikagokarn
We are trying to build two different PCBs - one with no wash flux solder paste and the other with a washable flux solder paste. How difficult is it to use the same SMT line and switch between the two pastes? I assume there will be some cleaning invol
Electronics Forum | Fri Mar 31 13:59:21 EDT 2017 | westshoredesign
Need more information. BUT if your strictly considering just the paste change. I would imagine your changeover would be little to no different than changing to the second board if you were using the same paste. Maybe take extra care cleaning your sq
Electronics Forum | Fri Apr 07 09:03:07 EDT 2017 | pavel_murtishev
jng123, Process-wise using one solder paste type is preferred regardless of paste type. If you want clean both paste types in one cleaning machine your manufacturer might have, this potentially could lead to white residue issue due to chemical reac
Electronics Forum | Thu Jul 14 09:42:36 EDT 2005 | saragorcos
Our facility helps customers clean no-clean soldered boards on a regular basis, and it definitely can be done but is a little more challenging than boards built with water soluble flux - one piece of advice I would give is to use low water pressure (
Electronics Forum | Wed Dec 09 09:47:32 EST 2009 | dyoungquist
I am curious as to why you need to mix.... We use a 500g cartridge with air gun. Our process is remove the cartridge from the fridge, allow it to warm up to room temperature before inserting into air gun, then apply bead of paste to the stencil. N
Electronics Forum | Fri Dec 01 16:02:33 EST 2000 | Jim M
Thanks for your reply. I 've tried to clarify and answer your questions. The water soluble paste used is WS3060, type 4. The boards are sent through a inline di cleaner after reflow. There is a hot Di waterwash, rinse and then hot air to dry the wa
Electronics Forum | Sat Sep 07 06:57:33 EDT 2002 | mk
I agree but, are there really heavy metals in this water? Our process is as follows. Print Paste Reflow Board (no components, water soluble paste only) Wash Board Same reflow profile for almost every order so no solder balling issues etc. Carbon an
