Electronics Forum: solder paste water soluble m705-515a-hn (Page 1 of 22)

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Sat Jul 28 03:05:35 EDT 2001 | Frank

Hi guy Does anyone have experiance with printing problem between solder paste water soluble 62/36/2 and gold plating PCB? I do have problem about insufficient solder after printing although I used the same printing parameter as when I print with ano

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Sun Jul 29 08:36:39 EDT 2001 | davef

You have provided very little information. Two similar possibilites come to mind: poor pad solderability protection and old boards. POOR SOLDERABILITY PROTECTION: Maybe the nickel plating under the gold is oxidized, contaminated, or otherwise very

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Sun Jul 29 23:58:08 EDT 2001 | Frank

Hi Dave Thanks for your information. The problem that I found is paste not stick well on pads ( solder paste printing process). When the table move down (PCB saperate from stencil) some of paste stick on aperture instead pads. Solder paste : Delta

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Mon Jul 30 21:12:32 EDT 2001 | davef

"Poor release" (paste hanging-up in the stencil holes) could have three main (or combination of) causes: 1 Equipment: Stencil is too thick. Specifically, a 6 thou stencil should be OK, providing you don�t violate the area and aspect ratios in the fi

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Mon Jul 30 01:34:46 EDT 2001 | mugen

Best thing to do, is consult your solder paste supplier, bring him/her in, and ask for their humble professional opinion? If they refuse, strongly consider switching to a supplier, with responsive "humble professional opinions" to share, one that spr

Printing problem, water soluble paste with gold plating PCB..

Electronics Forum | Tue Jul 31 00:48:55 EDT 2001 | Frank

Sorry I forgot to provide enough information. Stencil thickness is 6 mil Aperture width is 10 mil Aspect ratio (aperture area / wall area) = 0.72 Solder paste mesh size, type 3 (-325 +500) With this aspect ratio we can printing without any probl

Mixing No-clean and water soluble processes

Electronics Forum | Tue Feb 23 12:56:03 EST 2010 | vleasher

Is there any harm in washing SMT soldered with NoClean paste? The PCA has some large thru-hole connectors that we would prefer to do as water soluble on out selective solder but the SMT consists of LGA's and other low parts that we would not be able

Mixing No-clean and water soluble processes

Electronics Forum | Tue Feb 23 16:45:36 EST 2010 | dyoungquist

Davef is right on as usual. We are doing exactly what you do. Some smt with no clean paste then the plate through connectors on our selective solder machine using water soluble flux. We then clean with a ultrasonic water process. We do see the re

Mixing No-clean and water soluble processes

Electronics Forum | Thu Feb 25 03:37:25 EST 2010 | xps

Sorry, but I don't know this brand. Anyway pay attention, because if the chemistry is resin based, is difficult to clean and the residuals may be hygroscopic. So, I only can suggest you to read the data sheet and follow the instructions by the solder

baked on water soluble flux residue betwwen fine pitch comp.

Electronics Forum | Fri Dec 01 14:12:50 EST 2000 | Jim M.

My company currently uses water soluble paste for our SMT process. We were having trouble retaining hot water in our in line, closed loop DI cleaner. The cleaner kept shutting down when the water temp. dropped below 125C. As a result, the conveyor


solder paste water soluble m705-515a-hn searches for Companies, Equipment, Machines, Suppliers & Information

2024 Eptac IPC Certification Training Schedule

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Blackfox IPC Training & Certification

World's Best Reflow Oven Customizable for Unique Applications
SMT feeders

Stencil Printing 101 Training Course
SMT spare parts

Internet marketing services for manufacturing companies