Electronics Forum | Tue Aug 30 07:01:52 EDT 2005 | edgetech
EdgeTech SMT Tech here. I was questioning the process our Engineers are using concerning Water Soluble solder paste. I have no experience with this paste. I was wondering what need so be done differently when using this paste. As far as I know the on
Electronics Forum | Tue Feb 13 16:28:17 EST 2007 | rob_thomas
There are solder pastes that seem to give you less voiding. Currently we are using Kester ,water soluble paste that gives us pretty good results on BGA's up to 0.5mm pitch. Stencil design was a challenge but we are getting consistent results . Here
Electronics Forum | Tue May 02 14:38:06 EDT 2006 | bhall
Currently I am using a water soluble solder paste and no clean wire solder. For awhile now I have been pushing to switch to no clean across the board. Can anyone give me an idea of how this will effect production? Switching to no clean will allow m
Electronics Forum | Mon Dec 15 15:34:17 EST 2008 | dyoungquist
Sorry it has taken me so long to respond. I got pulled off onto other projects and was not able to work on the solution to the problen until recently. The solution we have come up with is to change from no-clean flux based solder paste to water sol
Electronics Forum | Fri Apr 03 02:52:42 EST 1998 | Jacqueline Coia
At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash proce
Electronics Forum | Fri Jun 25 12:10:34 EDT 2004 | tcp
We use water soluble paste, Kester R560. These units are wave soldered and cleaned in an Electrovert Aquastorm water wash with a 3% Kester saponifier solution in the first stage.
Electronics Forum | Fri Oct 17 17:25:43 EDT 2003 | gpaelmo
we will be using water soluble solder paste. cleaning will be for smt assemblies only. waste water will be treated prior to disposal. as far as testing for cleanliness, any suggestions or recommendations on test equipment would be greatly appreciated
Electronics Forum | Sun May 19 06:43:37 EDT 2002 | xzinxzin
I using water-soluble solder paste, the solder paste recommended, the peak temperature is 215 deg C, the dwell time above 183 deg C is 60-90 sec. **How I can do, the flux in solder paste is active enough to remove the corrosion on the Cu leads to get
Electronics Forum | Tue Sep 30 14:24:37 EDT 2008 | eedlund
A water soluble solder paste (AIM WS483), reflow and wash. We are considering using AIM NC254 No-clean solder paste to eliminate the wash step.
Electronics Forum | Fri Oct 05 14:17:57 EDT 2018 | waveroom
i HAVE A CUSTOMER WHO IS USING A WATER SOLUBLE LEAD FREE SOLDER PASTE AND IT IS ADHERING TO THE SQUEEGEE. ANY IDEAS HOW TO SOLVE THIS ISSUE WOULD HELP.