Electronics Forum | Tue Apr 29 15:59:20 EDT 2003 | babe
First I would have your solder bath analyzed by a certified lab. Secondly I would get an analysis from each supplier that you are speaking with on their solder bar. The lowest price does not necessarily mean the best product and vice versa. Alot of p
Electronics Forum | Mon Jul 24 22:50:43 EDT 2017 | dawson
In fact, we can solve this problem easily. AOI only check whether the IC is soldered well. But we can ask our technician to make a test first to control the reflowing temperature and time. 1. using tool to test the temperature between the bottom IC
Electronics Forum | Thu May 03 17:33:20 EDT 2018 | dleeper
Solder paste selection can have a huge impact on size and quantity of voids. Talk to a few suppliers and ask for their recommendation on low voiding formulas. Pick a few of your top candidates and then perform a DOE to see who has the best result. S
Electronics Forum | Thu Mar 28 16:00:31 EST 2002 | bschreiber
Hello Dave, Water Washable (Organic Acid, OA) post solder flux residue is designed for cleaning in plain water without cleaning chemical additives. The real advantage of water washable flux was that it cleaned in plain water without additives � no
Electronics Forum | Sun Sep 26 11:54:06 EDT 1999 | Earl Moon
| i had a problem here, during the wave soldering process, we apply a water soluble mask on the gold finger to protect it from contamination. But after washing, there is still some mask left on the gold finger. | Can anyone pls advise is there any pa
Electronics Forum | Thu Feb 15 20:27:11 EST 2007 | vshan
Hi Chris Good Day!!!! well we are running flex panel(150x270) with one connector(3 pin legs both sides) insert. Each panel consists of 28 parts and its used for disk drive industries. We are having a pallet to support with the top cover design such
Electronics Forum | Fri Sep 07 09:13:21 EDT 2007 | smtirl
Folks, we've recently upgraded to Heller MKIII reflow ovens with Gen 9 cooling units. We're running N2 atmosphere at 1000ppm O2 and Kester256 solder paste. We're seeing a big problem with flux residues building up in the cooling section of the
Electronics Forum | Thu Apr 16 09:31:28 EDT 2009 | padawanlinuxero
Hi all! I have a problem, I have a wave solder a Econopak plus by Electrovert, and someone move something when I was not here, now when I try to load a recipe a very specific recipe is givening me a error message : MyrecipeName Isam error 30000: Da
Electronics Forum | Fri Sep 20 01:39:21 EDT 2013 | winson16
gold, one of the stablest elements on the > periodic table oxidising. Are you sure, and why > would you want to reduce the vision fail rate on > a part that is clearly shockingly poor? Old inventory is holding a huge material cost and if i can f
Electronics Forum | Tue Mar 08 15:35:43 EST 2016 | fuji_user_2014
I am having problems with LGA solder balls under the devices. Here are some of the details: 1. There are only 2 affected parts @4 locations. 2. The parts are LTM4616EV#PBF and LTM4608AEV#PBF. 3. We are using a ramp soak spike profile. 0-100secs=r
