Electronics Forum | Sun Oct 10 17:57:48 EDT 1999 | JohnW
Folk's, I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. I was wanting to do a straw poll on you guy's as to the type of resist's you are using Glos
Electronics Forum | Mon Oct 11 13:08:29 EDT 1999 | Dave F
| Folk's, | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | I was wanting to do a straw poll on you guy's as to the type of resist's you are us
Electronics Forum | Tue Sep 21 04:00:27 EDT 1999 | Wolfgang Busko
| My stencil thickness is 6 mil and we got qfp's with fine pitch. | how many percent should i reduce my stencil aperture using a 6 mil stencil for 0.5 mm pitch and 0.4 mm pitch ? | | thanks | We use 6 mil lasercut stencils with 15% reduction and th
Electronics Forum | Wed Sep 08 16:44:15 EDT 1999 | Rob Jankowski
I am wave soldering a single sided through hole PCB array with (6) .040" round diameter pins that sit .5" off the PCB, and .080" apart. The problem being experienced is that solderballs are appearing on the end of the pins. I have tried decreasing
Electronics Forum | Sat Aug 07 11:47:47 EDT 1999 | JohnW
| | | | | | | | | | | | Hello, | | | If you are using no-clean and they are entrapped in the flux it is also IPC accepted but i havent found a customer yet who agrees with that. Im sure you have checked your profile. I had the same problem with chi
Electronics Forum | Sat Apr 10 01:11:37 EDT 1999 | forest
Our company is going to use BGA(1.27mm pitch) But I have heard of troubles with P-BGA. It is that cracks occured between solderball and gold plating of PCB during ICT(incircuit test). We know that gold plating of PWB is not good for BGA, so we decide
Electronics Forum | Wed Feb 17 15:56:22 EST 1999 | Tuffty
| Dear Al, | Are these reworked, double-sided boards? | | If you attempt to clean side #2 of double-sided misprint in a "spray" type cleaner, millions of solder balls can be broadcast throughout the same chamber as the populated side #1. Or, if thi
Electronics Forum | Thu Oct 01 06:44:44 EDT 1998 | PARK KYUNG SAM
Are there anyone who can give me the answer about solder ball problem? We have 12 layer PCB and double sided PCB. After one side reflow soldering We found lots of solder ball under the PCB. The solder ball was coming out from via hole. So when w
Electronics Forum | Mon Jul 20 13:47:04 EDT 1998 | MMurphy
:On a dense board, a great way to reduce solderballing is to either; print paste 1:1 with pad size using a 5mil foil, reduce aperture openings by 10% of pad size or change aperture shape to "Home Plate" design. If none of these work on their own you
Electronics Forum | Mon Jul 20 19:31:00 EDT 1998 | Eric
| | :On a dense board, a great way to reduce solderballing is to either; print paste 1:1 with pad size using a 5mil foil, reduce aperture openings by 10% of pad size or change aperture shape to "Home Plate" design. If none of these work on their ow
.png)
