Electronics Forum | Wed Mar 08 10:46:40 EST 2006 | Chunks
Don't forget to buy the "Lead free heelstraps, smocks, wriststraps, hairnets and repair table" too. They cost twice as much, but you have to have them! We use regular wick and it works well with the LF solder. Vendor even ageed there was no need t
Electronics Forum | Thu Mar 16 12:48:12 EST 2006 | russ
The copper based part is it copper that you are soldering to or did you tell us what the base material was for the lead. Generally all leads are plated with something such as Tin/Lead, palladium over nickel, tin, etc... You cannot solder to bare co
Electronics Forum | Tue Mar 21 17:44:45 EST 2006 | omar_verdugo
hi all, could someone have an idea, would it be the best method to attach a flex cable to a pcb. right now, we are using a hot bar to solder the flex to the pcb, but we are having troubles with this method. the process is no regular all the time a
Electronics Forum | Tue Mar 21 21:24:48 EST 2006 | alphaman
I recently acquired an older Dover Soltec 6522/23cc wave solder machine. The machine appears to be in good working order and I thought I would get it running to use as a backup. Can anyone tell me where I might get an operators manual. I have the
Electronics Forum | Sat May 27 12:50:14 EDT 2006 | GS
HI, just my 0,00001 cents Which preheat system does your wave solder has? for instance ? - IR ? - Bottom only ? - IR + Forced Air ? (bottom) - IR + Forced Air (bottom) IR top ? PCB thickness ? Appropriate preheat is important when looking to f
Electronics Forum | Mon Mar 27 21:09:29 EST 2006 | ms
Thanks Dave I'm not convinced the air is necessarily in the paste from manufacture - suspicious that it may be folding in during the change in direction of the print cycle - or as the paste travels across apertures. It is not necessarily in the fir
Electronics Forum | Thu Apr 20 03:46:26 EDT 2006 | aj
Hi Jon, Thanks for that. I seem to be having a problem getting a unit on Trial. I have plenty of access and my main priority is to reduce the amount of dross (or may I say Solder) that we send back as Dross, I am based in Ireland so I have to go t
Electronics Forum | amol_kane |
Fri Apr 14 10:16:37 EDT 2006
Electronics Forum | Tue Apr 18 10:56:35 EDT 2006 | jaymcgowan
I am working on a new product that has a flex circuit attached to an 8 layer motherboard. There are 25+/- connections. I am investigating hot bar soldering vs ACF (conductive film) to make the attachment. I am looking for literature/papers/experim
Electronics Forum | Wed May 03 11:51:37 EDT 2006 | samir
Chunks, We have custom nozzles here in Riyadh that are designed to solder through-hole with SMT 0805 R's and C's just 0.5mm away. ERSA charged an arm and a leg for these, so I buy them from my toolmaker, Asadulah , for half the price. They come in