Electronics Forum | Sat Jun 23 21:04:44 EDT 2001 | Stefan
If you want to tinker a bit with old machines, you could buy an inexpensive ( under $ 10,000 ) used Pick&Place machine and reverse the polarity on the tape feeding motor. If you don't heat seal the cover tape, but use pressure sensitive cover tape,
Electronics Forum | Fri Apr 25 15:01:29 EDT 2003 | swagner
Go to http://www.gsilumonics.com we use several of their systems for both paste and component inspection and week in and week out maintain a 99.85%+ first pass yield on a no post reflow repair line.
Electronics Forum | Sat Nov 28 08:42:59 EST 2009 | jax
Quick List: 1. Cells 2. Valor 3. Aegis 4. Siemens 5. Optimal I have used Cells, Valor, Aegis, and Optimal (I think Siemens leans more towards a PLM system). I would recommend Optimal, but it will all depend on how in-depth yo
Electronics Forum | Thu Aug 28 12:42:53 EDT 2014 | mcapizzi
One camera is used with typically one of the following prism set-ups: The split prism system, in its most common form, is a cube made from two triangular glass prisms which are glued together at their base using polyester, epoxy, or urethane-based ad
Electronics Forum | Mon Mar 13 19:16:33 EST 2006 | dynamic
Hi Steveo, What sort of products are you using the vacunest on? ie: PCB thickness, panel size, complexity etc... What brands and types of screen printers are you using? - Did you have to modify your printers? Do you also use it in your placement
Electronics Forum | Fri Mar 22 14:34:16 EDT 2024 | carl_p
Used a Gen 3 system for screens & boards. TDC for inline washing.
Electronics Forum | Thu Jan 13 16:15:05 EST 2005 | fmonette
Hi Steve, My company offers this kind of system in two different versions ; a low-cost semi-automatic configuration using barcode labels and a closed-loop configuration using RFID tags to retrofit existing feeders into smart feeders. Please contac
Electronics Forum | Wed Aug 27 13:50:57 EDT 2014 | mcapizzi
The superior machines typically use only a split vision system which allows two pictures to be viewed simultaneously. The PCB (pads) and the underside (balls) of the BGA can be observed. By using micrometer screws, both exposures can be adjusted exac
Electronics Forum | Mon Mar 11 12:58:31 EDT 2024 | denism
Hi Dima, A past job used a PSE 300 from KOLB for 10 years. With proper maintenance, no problems were found. DST InJet was used in another production. As far as I know, there were no problems either. DST also has an interesting option, such as measuri
Electronics Forum | Thu Feb 16 09:37:11 EST 2006 | mgillespie
hi, > > we tried to introduce form-flex a few > years back and it caused more problems than it > fixed. > > Switched back to pins and no > problems. > > It might have improved since but I > would be reluctant to get them again unless I was >
