Electronics Forum | Sat Jul 04 01:11:17 EDT 2009 | cesar444
Dear Adresse, I ’m sorry my disturbing you with my e-mail, but I need some help from you. I have a QUAD 1000 SMT machine, and I would be need a software-driver copy and a technical drawing to this machine. If you could help me, pls send these by e-m
Electronics Forum | Sat Dec 30 18:49:39 EST 2006 | A.S.
TRY TO REPROGRAM THE AXISES AND CHECK THE WIRES GOING TO THE E-STOP BUTTON THESE PROBLEMS CAN CUASE THESE ERROS TO KEEP COMING UP TRY THIS AND YOU MAY FIX YOUR PROBLEM
Electronics Forum | Thu Feb 22 09:21:57 EST 2007 | Cmiller
Mydata would be good, Contact Systems would be good for what you are doing, very good software, crappy feeders but fine for 0805 parts. You may be able to get a Universal GSM pretty cheap these days. If you make a decision then look for a machine you
Electronics Forum | Wed Feb 21 12:40:44 EST 2007 | jmelson
There is a Quad 1000 in eBay stores, but I can't get much info on what a Quad 1000 can or can't do. It appears to be a "chip shooter", but can it do 0805 passives, too? Does it need an option to do those? Does the 1000 have some form of optical ce
Electronics Forum | Thu Jul 08 07:11:11 EDT 2004 | modwyer
Folks, Anybody know if Sony SI-E1000-III & SI-E2000 placement machines are any good? Are the reliable and consistent down to 0402 components? Thanks Mark
Electronics Forum | Fri Feb 10 09:45:14 EST 2006 | ghm
Where can I find information about the typical Sony problems ?
Electronics Forum | Tue Aug 01 08:36:28 EDT 2006 | M
What do you need to know? I know thw machine very well.
Electronics Forum | Sun Aug 01 12:08:32 EDT 2004 | Ace
Hello An asset to any production floor. I worked with the Sony the SI-E1000 and SI-E2000, The SI-E1000 has a 12 nozzle planet head, I actually ran many placement trials with these machines 0603 (metric) 0201 (Imp). What can I say!! capabillity was
Electronics Forum | Thu Jul 08 15:13:31 EDT 2004 | stefwitt
Now, that I know these are Sony machines, I may also know where the machines are coming from. However, Siemens machines were also used in this plant and one must have got confused here. Here is at least a picture of the E1000 model. http://www.geocit
Electronics Forum | Sat Feb 05 15:36:48 EST 2005 | etienne
Hi Brad, I suggest you get in contact with Sony. http://www.sonyfa.com/si_e1000/sie1000_producthome.cfm They got the SI E-1100, capable of placing QFPs64/0.5mm simultaenously with all other heads full of components, not like many other machines. See
winsouce.jpg)