Electronics Forum | Thu Aug 29 20:01:23 EDT 2002 | davef
Many people use the same spacing [and pad designs] as they use for primary side SMT. We don�t. DOWN STREAM SMT-TO-SMT SPACING: In addition to proper orientation, components cannot be immediately upstream of terminations that are to be soldered or b
Electronics Forum | Mon May 14 13:01:21 EDT 2001 | Charlie
We had two 51 space trays. One was modified by machine shop to hold two waffle trays. We bought a 31 space tray thinking it would hold one tray, it doesn't. We modified it to hold one tray. We than learned, from tech support, that a 31 space base sho
Electronics Forum | Fri Oct 29 10:57:45 EDT 1999 | JohnJ
We considered direct marking already John. It's not very practical for us to do that. We need to put labels on components as well as boards. A laser or inkjet would cause us to have to change too many things in our processes. We'd still need to do la
Electronics Forum | Fri Jan 09 09:43:48 EST 2009 | boardhouse
Hi Simon, The main reason that it would probably be removed would be do to lack of clearance for a soldermask dam from pad to pad. typically if the clearance from pad to pad is under .008 the solder mask dam would be removed. Min recomended dam siz
Electronics Forum | Wed Aug 05 08:16:34 EDT 2015 | emeto
Hi, that's how it works: 1. Zoom to the object you want to start with. 2. Click S to center to the object. Depending on the zoom you can center to pad, line, corner.... 3. Click Z(this zeroes your Relative coordinates). If you click Ctrl+z(this ze
Electronics Forum | Mon Oct 09 06:16:31 EDT 2017 | jamesbarnhart
I think you needed an IPC Class 3 annular ring because for very dense designs, the smaller the annular ring the better, as less space is taken by the pad or via and more space can be dedicated to routing the traces in highly populated areas of the bo
Electronics Forum | Wed Nov 07 07:31:20 EST 2001 | steven
what is ideal or minimun spacing in between 2 pads to avoid bridging? thanks
Electronics Forum | Fri Oct 18 14:51:31 EDT 2002 | Pete C
Yep, "operator head space". Thx. Brian
Electronics Forum | Thu Jun 17 11:46:33 EDT 2004 | Claude_Couture
Please define "worst case for feeder sizes". Quantity? Arrangement? wasted feeder space?
Electronics Forum | Thu Jul 22 16:06:07 EDT 2004 | russ
What is your pad dimensions/spacing at components you are having trouble with