Electronics Forum | Mon Jul 25 23:05:40 EDT 2022 | kamedatec
I did something similar on Neoden machines. VisualPlace software helps a lot with this task, but the coordinates are never in the correct area where the PCB is, so I manually check the position of the first component and my software adjusts the posit
Electronics Forum | Mon Aug 01 13:30:05 EDT 2022 | unisoft
>> ProntoPLACE creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic features of ProntoVIEW-MARKUP. Most machines are supported such as Assem
Electronics Forum | Tue Aug 02 20:12:33 EDT 2022 | cbeneat
So these are XPE's? Are they CM402's or 602's? Are you using custom nozzles? We've had the same issues over the years. We've gotten our custom nozzles from Count on Tools, I actually have 10 new ones on the way. Slowing the placement speed, increasin
Electronics Forum | Wed Aug 03 13:04:04 EDT 2022 | proceng1
My initial thought is that the part is slightly delayed in releasing. When you are running one head, it doesn't matter. But when running multiple heads, the machine starts to move to the next placement before the part has fully released from the noz
Electronics Forum | Thu Oct 20 15:44:16 EDT 2022 | smtusa
What about MY100? Its based on the same high speed hydra head just two of them. Do you not recommend those as well? Originally, I was looking at a MY9 before spending on a MY100dx. Certain things mydata do make it attractive but im a low mix, high
Electronics Forum | Mon Mar 06 15:33:43 EST 2023 | kumarb
Does the 'R' suffix not mean a rotary head on the machine? This will then allow for that head to be a 'chip shooter' but does so with a lower height off the PCB being assembled. That is, the rotary head offers some gain in speed but is unable to moun
Electronics Forum | Tue Sep 20 14:36:53 EDT 2022 | sarason
Have you considered using PCBSYynergy for the CAD conversion and bypass the gerber step. Then add in Programming by Ealead. https://ealead-e.ucoz.com/index/products/0-8 https://pcbsynergy.com This ends the breaking of QC by bypassing human process
Electronics Forum | Thu Nov 30 16:18:28 EST 2023 | proceng1
We have a customer that at one point had a dozen LED boards that were all very similar in size. They used Aluminum boards and I found that the difference in thermal mass between the assemblies was negligible considering the largest difference was ac
Electronics Forum | Wed May 29 02:01:10 EDT 2024 | kumarb
No direct experience with these parts but to me, the air flow from top side fans are creating a wind tunnel that is causing the smaller parts to fly. Can you adjust the speed of these fans? Review the paste - review the component mount height. We fac
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc
