Electronics Forum | Fri Mar 29 16:57:07 EDT 2013 | aemery
Gentlemen, Just became a member and scanning the old posts hoping to help people out with their MPM printers. Most of this info is correct, the last post was the best. Offsets on an Accuflex printer can be put in either per process program or glob
Electronics Forum | Fri Jan 04 13:47:00 EST 2013 | cyber_wolf
If its the same as a Momentum then no you do not need to use jigs. There is a "global offset" field that allows you to add background offsets. The glass plate jig calibration procedure only needs to be used after a major crash or if you feel the need
Electronics Forum | Wed Mar 07 12:57:55 EST 2018 | aemery
Gerber EZ is not available on the Accuflex platform. Speedline (now ITW EAE), like most manufactures, do not want to offer new tools on old platforms. There is one feature in the AccuPro software that I don't believe was added in any version of the
Electronics Forum | Wed Aug 03 10:56:47 EDT 2011 | cyber_wolf
We have a new MPM Momentum. It's hands down the best printer we have ever worked with. Load program--add paste---forget about it. Runs every day all day with no issues what so ever. I come from a "machine background" and the MPM's are much more robus
Electronics Forum | Thu Jul 07 13:11:41 EDT 2016 | emeto
If the offsets are the same for every board and stencil you checked - You should calibrate this machine. Usually you should have a calibration stencil and board to do that.
Electronics Forum | Sat Jul 16 17:29:50 EDT 2016 | aemery
Yes, you need to run the 'offsets' calibration to correct the offset issue. If the machine is in good working order and all of the other alignments and cal's are completed then you are good shape to go to run this cal. If not, you could waste a few
Electronics Forum | Sun Aug 28 23:53:58 EDT 2016 | aemery
I don't think there is a camera off message in the software, but I might be wrong. So I am making a bit of an assumption here that you didn't have a displayed image and your error was a fiducial not found error. I am also wondering if you decided to
Electronics Forum | Tue Jan 03 16:23:37 EST 2006 | Phil
Our past experience with Frost and Sullivan is that they derive most of their data from interviews with the subject companies and press releases. That puts them a half a notch above asking the sales reps for info (except with F&S, the total won't be
Electronics Forum | Fri Mar 09 01:48:26 EST 2018 | aemery
Unfortunately Gerber EZ is probably the one thing I know very little about. As an FSE with Speedline I only had one client at that time that was using it and an application engineer came in and helped them with it. Sorry I can't give a direct answer
Electronics Forum | Thu Aug 30 11:59:00 EDT 2001 | Spanky
Hey all, I have 3 questions about reflow. Hopefully someone can help me. 1. I am having a problem. I set the peak at 230 and my mole thermocouples are telling me the temp in that zone gets to 237. How is this possible even if the thermocouple
