Electronics Forum | Thu Aug 30 11:59:00 EDT 2001 | Spanky
Hey all, I have 3 questions about reflow. Hopefully someone can help me. 1. I am having a problem. I set the peak at 230 and my mole thermocouples are telling me the temp in that zone gets to 237. How is this possible even if the thermocouple
Electronics Forum | Thu Dec 21 09:32:35 EST 2006 | Brandon
Does anyone know of a source other than speedline? I know these can be had for $100. Speedline wants $1600. It is a cooling zone blower motor for a cross blow system. Not the same blower you see on the top of the heating zones. This one mounts from t
Electronics Forum | Mon Jan 15 18:15:15 EST 2007 | jaimebc
What test did you do to come to the conclusion that your conveyor is running 11 seconds slow?
Electronics Forum | Tue Jan 16 07:36:52 EST 2007 | leemeyer
Yes, these 2 pins are jumpered together. Thanks
Electronics Forum | Tue Jan 16 08:00:21 EST 2007 | leemeyer
Forget that idea. This is an informational screen and changes cannot be made.
Electronics Forum | Tue Jan 16 11:21:39 EST 2007 | leemeyer
I checked this and it seems to pertain to the rail conveyor only. We are using the belt conveyor. Thanks
Electronics Forum | Mon Jan 15 15:18:13 EST 2007 | jaimebc
We have an oMniflow 7 as well, and looking at the calibration procedure, it indicates that turning the pots ( total of 5 pots. 4 on the lower board and one on the upper board )fully counter-clockwise is the FIRST step of a series of tests. Then you w
Electronics Forum | Mon Jan 15 18:58:50 EST 2007 | leemeyer
Set the conveyor to run at 1 foot/minute and the conveyor moves 1 foot in 1:11. Set the conveyor to move 2 feet per minute and the conveyor moves 2 feet in 1:11. etc...
Electronics Forum | Mon Jan 15 19:21:08 EST 2007 | SWAG
Not sure if this has any bearing on the problem but did you check to see that T2 and T3 are jumped on the speed control board per the first note in the prodedure?
Electronics Forum | Tue Jan 16 07:44:48 EST 2007 | jdengler
This 11 seconds is constant? Seems like it's a clock issue. The machine thinks a minute is 71 seconds. Jerry
winsouce.jpg)
