Electronics Forum | Mon Apr 08 15:39:10 EDT 2024 | mistrthou
The error is: MOT-Command/205: Motor speed out of control Motor speed deviates from expected speed. – Problem with power supply, motor current too low. – Mechanical problem, friction too high or tool stuck in Z. I'd be looking at excessive friction
Electronics Forum | Fri Feb 21 17:12:43 EST 2020 | SMTA-Alex
Have you performed the maintenance? It might need grease, or there might be excess old grease, that's putting more friction on the Hydra Z. Check if there might be interference from the vacuum tubes or wires.
Electronics Forum | Wed Mar 23 05:17:23 EDT 2011 | arwankhoiruddin
Hi All. I want to know what is the IPC/JEDEC standard for solder paste printing defects. From the brochures of SPI Machines, the recognized defects are excessive, insufficient, misalignment, no solder, bridging, and solder shape error. What document
Electronics Forum | Wed Nov 28 04:00:52 EST 2018 | mnyut
Has the Gerber files already been checked with a Gerber viewer?
Electronics Forum | Thu Jul 18 15:03:54 EDT 2024 | SMTA-64387939
Reusing paste that has been on the stencil for long periods of time can be a little tricky. Depends on the formula, environment that its used in, quality issues, technology being printed. Throughout the shift, new paste needs be added as its bein
Electronics Forum | Mon Sep 24 23:33:20 EDT 2018 | vinzon02
Hi all; I need advise to Koh Young SPI machine user. I had problem on importing gerber file. I requested stencil gerber files to supplier but all gerber files send to me cannot be import on KY8030-2 machine. Error appears "There is no Gerber file t
Electronics Forum | Sat Dec 01 02:28:40 EST 2018 | buckcho
Hi there, there are usually two gerber types that stencil guys send. Ask them to send the other type. Additionally contact me if you want to know more - there is a workaround with free gerbview program - load the gerber and just save it.
Electronics Forum | Fri May 07 21:31:52 EDT 2021 | sosigguy
Have you checked WinMCS? it's the software in windows that controls the machine. if you open it up it might have thrown some error codes, i believe it has some diagnostics in it aswell.
Electronics Forum | Mon Jul 29 18:51:47 EDT 2002 | davef
Consider: * Printing: errors [ie, insufficient, excess, skipping, etc.] paste doesn�t roll in front of squeegee, paste adheres to squeegee at the end of stroke, paste does not release. * Component placement: orientation, wrong component, missing comp
Electronics Forum | Tue May 24 07:51:43 EDT 2022 | spoiltforchoice
Doesn't exist. True Solder Paste dispensing is a Mycronic only solution with Essemtec coming behind with slightly less cpapbility. With Essemtec you can have one machine that prints and places, that saves space, with Panansonic you can have machines
