Electronics Forum | Fri May 11 17:28:10 EDT 2012 | peteb
Have you tried adjusting the spindle height? To do this you will need UIC fixture #46315501.
Electronics Forum | Sun Aug 19 07:59:06 EDT 2012 | processman
Thanks for the replies guys. Interesting the one with the dryer in the air supply, will look into this. Sure some of our service guys lightly grease the O rings within the spindles, have been trying to get them away from this. Also interesting to h
Electronics Forum | Fri Aug 17 17:23:21 EDT 2012 | processman
Hi, Looking for some experience from others regarding frequency of repair, maintenance etc on UIC Lightning Head spindles. We have a genesis machine for the last year and we are continually removing and repairing spindles due to the Vaccuum or b
Electronics Forum | Thu Oct 20 19:13:21 EDT 2011 | eadthem
When you get in to a 30 spindle lightning head or the dual and single beam 7 spindle flexjets from UIC, there generally really solid machines. The only flakeyness we have is with a GC120 (4 beams in 1 box). and of that most of the issues are purely b
Electronics Forum | Sat Aug 18 22:43:14 EDT 2012 | eadthem
we service all of our lightning spindles once a year, Take the spinldes off. loosen the screw by the nylon cap and slide the locking pin out. run the spindle shaft, the nylon cap and pin assembly , and spring thrue a ultrasonic cleaner with 99% is
Electronics Forum | Tue Jun 26 10:23:43 EDT 2018 | ilavu
This video does not show FlexJet head, It is Flex head with 4 spindle. We have about 5 GSM with flex and FlexJet head with OS/2 and 4 with Windows2K. If you need any help, I will be glad to help you. Tushar
Electronics Forum | Fri Aug 25 23:54:26 EDT 2006 | mika
If You adjust the focus to perfection, You still need the UIC GSM calibration kit, so that the machine will know where the spindles are according to the cameras (OTHC, P2P:s, fiducial camera), X-Y-Theta-spindles, nozzle changer, feederbanks and mach
Electronics Forum | Sat Sep 26 14:54:52 EDT 2015 | ercdave1
Hello, just a quick update on this issue. I disabled head 2 on beam 2 which was the second head I worked on, and left only active the head that I had work with first and ran dry cycle with. after disabling the head 2, the machine zeroed with no pr
Electronics Forum | Tue Jun 28 11:45:27 EDT 2011 | jax
I have multiple machines consisting of a mix of the following: Single beam Lightning head machines (Advantis, Lead Screw) Dual Beam Seven Spindle machines (Genesis, Linear Drive) Single Beam Seven Spindle Machines Advantis, Lead Screw) The vintage ra
Electronics Forum | Fri Oct 28 09:44:11 EDT 2005 | PWH
I'm considering buying a UIC Advantis P&P machine. I'm worried about the huge, additional cost of new feeders. We've been running GSM's for years so we have tons of GSM vibe bases, tracks and feeders. UIC tells me that old pneumatic GSM feeders ca
