Electronics Forum | Fri Sep 23 08:16:57 EDT 2005 | gregp
Base, You are absolutely correct. This is what I intend to do. In fact, our feeders at one time had reel hangers that would allow for reel removal and thus splicing. Sometimes it is frustrating when people are set in their ways and won't consider
Electronics Forum | Thu Sep 22 13:09:16 EDT 2005 | gregp
Thanks for the reply Rob, This we already do. The machine will pick from the most efficient available feeder (assuming multiples of the same part number)...so when you remove the primary it will seemlessly move to the next available. When you re-in
Electronics Forum | Wed Sep 21 10:40:18 EDT 2005 | PWH
Splicing for us has been a rough go as we haven't really found a tool that works well/fast. We have a few different machines = different feeders. They all react different to a splicing "style". The best so far is a crimp tool that crimps a brass s
Electronics Forum | Fri Sep 23 03:11:31 EDT 2005 | Base
Hi All, I think you're adressing this issue from the wrong angle: What I'm reading is an equipment vendor who has an idea about what the best way of working is (replace entire feeders), and a (potential) customer who thinks otherwise (splicing). The
Electronics Forum | Fri Sep 23 09:25:46 EDT 2005 | Base
Hey Greg, As you already pointed out yourself: unless you can do away with covertape pickup-spools (or can figure out a way to empty them without loosing tension on the covertape) your feeders will not be suitable for several consecutive splices. S
Electronics Forum | Fri Sep 23 10:25:40 EDT 2005 | gregp
On our machines, the feeder release latch is designed such that the feeder goes offline (machine will not pick from it) before you can actually remove the feeder. This makes it virtually impossible to damage a nozzle or spindle. I'm not sure about
Electronics Forum | Fri Sep 23 04:11:53 EDT 2005 | Rob
Hi Greg, A larger floor standing spool would seem a good way to go, but on the larger plastic tapes, trying to accurately join them to feed through without jamming or coming apart is a total pain. Cheers, Rob
Electronics Forum | Fri Sep 23 10:34:22 EDT 2005 | Rob
Thanks Base, Yes, we did use the overlap method but we still have problems. Thankfully that product is now obsolete, so until next time.... Cheers, Rob.
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m
Electronics Forum | Wed Sep 21 10:11:12 EDT 2005 | gregp
Hi Rob, I'm not sure I know what you mean. Are you referring to adding leaders to cut tapes in order to minimize component loss? Also, I've never heard of tapes snapping. Is this something you see regularly on a particular piece of equipment? Th
