Electronics Forum | Tue Oct 29 03:29:23 EDT 2019 | ramesh_10377
hi with reference to below thread Nickel pad for spot welding on PCB i have a similar requirement. Plese help me to resolve. regards Ramesh.S
Electronics Forum | Sat Oct 01 15:51:54 EDT 2016 | mnikhilesh
I have seen a small nickel pad (probably) soldered on PCB which is used to spot weld the other nickel strip coming from battery. I have seen them in chinese protection boards. I need to know how and where I can find them? Is there any technical name
Electronics Forum | Mon Oct 03 05:10:19 EDT 2016 | robl
Hi Nikhilesh, It was a long time ago, but we used to buy the nickel in reels then had a cut and feed station on the smt machine with selectable sizes. We did many types of boards in very large volumes, and usually the Nickel strip was soldered to t
Electronics Forum | Wed Dec 04 09:46:15 EST 2002 | stefwitt
In a new design project, I would like to attach electronic components to a board using either sonic or resistance spot welding. Anyone out there, who could provide me with actual parameters, like frequency, current and equipment used?
Electronics Forum | Wed Mar 05 09:34:32 EST 2003 | HAROLD LICHT
WE HAVE A NEED TO BOND SOME LOW TEMPERATURE LED'S TO A THIN CIRCUIT BOARD LAMINATED TO A HEAT SINK. HAS ANYONE USED AN ULTRASONIC WELDER TO WELD COPPER GUL WING LEADS TO A COPPER PAD USING ULTRASONICS? IF NOT HAS ANYONE USED RESISTANCE SPOT WELDING
Electronics Forum | Thu Dec 24 01:06:11 EST 2009 | isd_jwendell
You can weld (spot) to chrome. Maybe you could weld a nickel tab to the chrome part?
Electronics Forum | Sat Jan 19 09:30:45 EST 2002 | davef
Yes, you can rework your thermocouples, but consider using a method other than arc welding. Arc welding can join thermocouples, but it uses a filler. The filler adds a third material that affects the slope of the thermal profile. We rework our the
Electronics Forum | Tue Apr 22 08:55:54 EDT 2014 | davef
I assume that you're talking about wanting to solder to metal tabs that are spot welded to the battery terminal. These tabs are not meant to be soldered. The metal was special selected for welding. In the old days, you could buy plumbing flux at th
Electronics Forum | Wed Sep 29 08:44:57 EDT 2004 | davef
Nothing to say that you can't purchase thermocouple wire and spot weld it in the machine shop at your local high school.
Electronics Forum | Thu Dec 24 10:34:51 EST 2009 | davef
isd.jww: First, the original poster is talking about pads, not component leads. Second, you're correct that chrome plated component leads can be attached by spot welding or crimping a solderable tab to the lead and then soldering the tab to the boa
