Electronics Forum | Sun Mar 26 19:02:05 EST 2006 | ms
Hi We are running automatic stencil printers, open squeegees, stainless stencil, stainless blades, print speed 25-30mm/sec. We have a frustrating consistency issue printing .37x.3mm apertures on a 45pin LGA (11 pads each side, 1 large ground in mid
Electronics Forum | Tue Sep 18 13:58:01 EDT 2001 | ert002
50%) only over the appertures where there was poor support. Most prints took 2 knead strokes to print OK, but this caused fine pitch leaded devices to almost short. stencil had to be be wiped after kneading. 2 similar devices with exactly the same
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
Electronics Forum | Thu Mar 08 05:37:43 EST 2018 | spoiltforchoice
Sparkfun users (professional hobbyists?) will have a totally different metric for what is acceptable compared to anyone who is doing this at a proper production level. Where I work I can at least empathise a little with the kind of business you might
Electronics Forum | Mon Jan 28 08:07:44 EST 2002 | JohnW
Sorry I keep forgetting you lot are backwards in the old metric system :0) anyhoo, yes IPC, the bastions of right well as long as your board is only 1.6mm thick (sorry 62mils)say that you need 75% min general and 50% on ground planes. I'd like to se
Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
Electronics Forum | Fri Feb 16 09:30:38 EST 2007 | DEK Answer Guy
Hello PR, PumpPrint� technologies enable high throughput adhesive deposition using a screen printing platform. Careful selection of stencil material, and informed study of the design of apertures and other stencil features, enables a wide range of
Electronics Forum | Wed Sep 08 08:25:26 EDT 1999 | Brad Kendall
Listed below are the issues Viking has been experiencing since the | installation of the Proflow Head: | 1. After installing new 350mm Wiper foil with metal | strip glued on it, It worked for about a week and suddenly meta
Electronics Forum | Tue Sep 07 15:28:13 EDT 1999 | Earl Moon
Listed below are the issues Viking has been experiencing since the installation of the Proflow Head: 1. After installing new 350mm Wiper foil with metal strip glued on it, It worked for about a week and suddenly metal stri
.jpg)
