Electronics Forum | Mon Apr 01 20:40:49 EDT 2013 | aemery
Quite sure it is one of the follow things. Squeegees are not tall enough (using after market blades); Are you using a stencil adapter? bottom surface of the stencil must be even with the top of the stencil shelves; printhead assy. is modified, faile
Electronics Forum | Fri Feb 27 09:48:56 EST 2004 | pjc
DEK can take the 20x20 frame with an adapter. Stencil image is center justified. Contact DEK for p/n and price for adapter.
Electronics Forum | Wed Jun 09 16:54:24 EDT 2004 | Ralf
Hi all I have a question to all of you who has experiences with Microflex MPM. There are two items: one is on contact calibration and second squeegee pressure calibration. Do i have to if i set PCB make these calibration?. Does Microflex have mechani
Electronics Forum | Thu Oct 23 14:55:47 EDT 2003 | markhoch
We use MPM and DEK printers, but that is really an irrelevent question. I'm looking for a stencil holder that holds 20" x 20" quick frame, (frameless), stencils. The stencil holder gets mounted on an adapter for use in the MPM (Ultraprint 500), and i
Electronics Forum | Mon May 02 08:32:50 EDT 2005 | jh0n!
We recently bought a used MPM UP1500 to upgrade from a manual DeHaart printer we'd been using for years. On the DeHaart, all of our stencils were 15" square. We purchased at auction a stencil adapter for an MPM printer (ie: 29" wide), however it's
Electronics Forum | Fri Feb 27 07:59:47 EST 2004 | cyber_wolf
Is it true that a DEK printer will not accept a standard 20X20 stencil. I have heard that the image on the stencil is offset as well.(you need special stencils just for DEK printers?) Do they make an adapter to accommodate standard 20X20's with cent
Electronics Forum | Mon May 02 10:49:10 EDT 2005 | pr
We are using a UP2000 so I'm not positive on this but.... The squeegee stroke will have to be taught by and the software will walk you through setting the stroke. What do you mean by "where it drops the pins to load/unload/locate"? If you follow th
Electronics Forum | Tue Mar 23 09:30:35 EST 1999 | Dan Hughes
Nancy, The mounting hole locations in most standard frames are the universal in both the screen and stencil industry, more over some of the newer machines clamp the frame in place. Most printers are very adjustable this way. If you were using a "qu
Electronics Forum | Mon May 02 18:54:28 EDT 2005 | MikeaJ
The answer you are looking for is part of your initial setup of the board and stencil. This information is to be found in the PCB setup menu/icon. The reason why the stencil loading pins are impacting the frame is because the default setting of the s
Electronics Forum | Tue Mar 16 20:17:13 EST 1999 | Chris G.
| Are stencils universal from one printer to another? We are looking into the possibility of going from Solderprint 1414 manual printer to a more automated printer. We are also considering bringing some boards we currently outsource in house. I w