Electronics Forum | Tue Oct 10 20:14:01 EDT 2000 | Dason C
Hi! CJ. Please advise what is your pitch size ie 15.7 mil or what is your capabiliy can you build the board with pitch 15.75 mil (please note that the actual dimension of the package is 0.4mm), and how many lead on the package. The pad width of Ind
Electronics Forum | Mon Nov 12 09:37:17 EST 2007 | russ
You need to perform process a capability study prior to putting these controls into place. Cleaning a stencil after each pass will get ugly, solvent residues remaining in apertures etc. 2D inspection is good. Change paste every hour will get very
Electronics Forum | Thu Mar 08 12:40:54 EST 2001 | Ralph Merk
We are currently using 0402 resistors and capacitors in our production process. Our equipment is as follows: - DEK 265 - Siemens S25/F5 - Vitronics XPM520(5 zones) - 2% silver solder Alpha WS678 The problem is that randomly some 0402 capacitors are
Electronics Forum | Wed Aug 01 13:35:41 EDT 2018 | tey422
Need all your experts out there for tips & tricks to make things work. I been giving a task to help redesign a simple board; only to load two components. The challenge is to use pick-n-place machine to load the coil onto the 50up array panel. Previou
Electronics Forum | Thu Sep 26 11:53:40 EDT 2019 | scotceltic
Experiencing some solder balls on an SSO-36 package. Things I am planning on checking are as follows: (not necesarilly in this order) I am just looking for a sanity check to see if you would try other things to help ? 1) Reflow profile. I have he
Electronics Forum | Mon Jul 13 11:33:54 EDT 2020 | spoiltforchoice
Well obviously the answer is yes. Most people would probably do it in their CAD package. If you want to use a third party tool Fab3000 does tis as well as a whole bunch of other things you might possibly want to do when processing files supplied by o
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Thu Sep 30 04:17:03 EDT 2004 | loz
Screen printing glue is definitely easier and more repeatable than using dispense methods (my opinion). Depends a lot though on pcb design and component mix. Contact your stencil vendor and they will be able to suggest different apertures, such as li
Electronics Forum | Mon Oct 07 23:04:05 EDT 2019 | SMTA-David
Hi, I have a semi-Auto paste stencil machine and use laser cut stainless stencil with T4 paste. When I start pasting boards the paste covers the pads and is well defined. Throughout the job we have been having some issues with feeder on pick and pl
Electronics Forum | Mon Aug 06 09:55:32 EDT 2012 | dyoungquist
Techspray makes a liquid called "Eco-Stencil SMT Stencil Cleaner" and also pre-saturated wipes by the same name. We spray the cleaner on the stencil and then use the wipes to clean the paste off of the stencil. Putting 1 wipe in each hand and rub